Xerox DocuPrint C2255 Quick Referenc Manual - Paper Jam In The Bypass Tray

 Clearing Paper Jams 

51

Paper Jam in the Bypass Tray

1.

Inspect the area of the paper tray where the 

paper enters the printer and remove the 

jammed paper. 

If the paper is torn, check to make sure that 

there are no pieces of paper left inside. 

Important

• If there are multiple sheets of paper loaded in the 

bypass tray, remove all of the paper. 

Paper Jam in Trays 1 - 4

Important

• Pulling out a tray without confirming the location of the 

paper jam can tear paper and cause pieces of paper to 

be left in the machine. This can cause a malfunction. Be 

sure to check the location of the paper jam on the left 

side of the control panel before clearing the jam. 

1.

Pull out the paper tray indicated on the 

display as the location of the paper jam. 

2.

Remove the jammed paper and any paper 

that is wrinkled. 

If the paper is torn, check to make sure that 

there are no pieces of paper left inside. 

3.

Gently slide the tray back in as far as it will 

go. 

Paper Jam Inside Cover A

Important

• When removing paper, take care not to touch the 

transfer belt (the black film belt) inside the cover on the 

upper left side. Scratches, dirt, or oil from your hands on 

the belt can reduce print quality. 

• There may be some toner on the transfer roller. 

However, this does not affect image quality.

1.

Lower the bypass tray. Next, while raising 

the release lever, gently open cover A.