1. DL manuals
  2. Xerox
  3. Printer
  4. Xerox 4110
  5. Configuration And Setup

Xerox Xerox 4110 Configuration And Setup

Manual is about: Xerox Copier/Printer User Guide

Summary of Xerox 4110

  • Page 1

    Server & controller solutions fiery ® exp4110 configuration and setup.

  • Page 2

    © 2005 electronics for imaging, inc. The information in this publication is covered under legal notices for this product. 45051574 22 september 2005.

  • Page 3: Ontents

    C ontents 3 c ontents i ntroduction 7 terminology and conventions 7 about this document 8 c onnecting to the n etwork 9 fiery exp4110 on the network 9 stages of installation on the network 10 summary of fiery exp4110 network installation 11 network server setup requirements 12 windows networks 12 ne...

  • Page 4

    C ontents 4 connecting network cable to the fiery exp4110 20 back view of the fiery exp4110 20 ethernet connection 20 about setup 21 setup from the control panel 21 setup from a network computer 21 s etting up the f iery exp4110 from the c ontrol p anel 22 fiery exp4110 setup from the control panel ...

  • Page 5

    C ontents 5 s etting up the f iery exp4110 from a network computer 59 accessing setup 59 local setup from the fiery exp4110 59 remote setup 60 general/server options 61 network setup 63 adapters/ports 63 protocols 64 security 65 services 65 printer setup options 74 printer connections 74 optimized p...

  • Page 6

    C ontents 6 a dministering the f iery exp4110 79 administrator functions 79 setting passwords 81 passwords from the control panel 81 passwords from a network computer 82 changing the windows xp system password 82 updating system software 83 configuring the job log 85 clearing the fiery exp4110 86 sa...

  • Page 7: Ntroduction

    I ntroduction 7 i ntroduction this document describes how to set up network servers and user computers to use the fiery exp4110 so that users can print to it as a high-performance networked printer. For general information about using the printer, your computer, your software, or your network, see t...

  • Page 8: About This Document

    I ntroduction 8 about this document this document covers the following topics: • network connectors on the fiery exp4110 • information specific to the fiery exp4110 about setting up network servers n ote : for information about network servers, see the documentation that accompanies your network sys...

  • Page 9: Onnecting

    C onnecting to the n etwork 9 c onnecting to the n etwork this chapter summarizes the stages in setting up the fiery exp4110. Fiery exp4110 on the network when the fiery exp4110 is connected to a network, it behaves as a networked pcl or postscript printer. The fiery exp4110 supports the following n...

  • Page 10

    C onnecting to the n etwork 10 stages of installation on the network installation can be performed by a network or printing administrator. The stages of a successful installation are: 1 configuring the network environment configure network servers to provide users with access to the fiery exp4110 as...

  • Page 11

    C onnecting to the n etwork 11 summary of fiery exp4110 network installation fiery exp4110 available on the network network server configuration network server configure network servers to specify fiery exp4110 print queues and fiery exp4110 users. Connection fiery exp4110 prepare a network node. Co...

  • Page 12

    C onnecting to the n etwork 12 network server setup requirements this section provides basic information about configuring the fiery exp4110 and using it on the network. It does not explain network functions for printing in general. Only information specific to the fiery exp4110 is presented. Settin...

  • Page 13

    C onnecting to the n etwork 13 append one of the following suffixes that corresponds to the fiery exp4110 print connection to the end of the netware queue names, as follows: _print _hold _direct n ote : these suffixes must be in english and in all lowercase letters. You do not need to perform setup ...

  • Page 15: Reparing

    P reparing for f iery exp4110 s etup 15 p reparing for f iery exp4110 s etup to prepare for printing at your site, you must do some initial fiery exp4110 configuration (or “setup”) to specify the network environment and the types of printing you do. Before you perform setup, you must decide the leve...

  • Page 16

    P reparing for f iery exp4110 s etup 16 print queue the print queue is the standard fiery exp4110 queue. Jobs sent to the print queue are processed and printed in the order in which they are received. Jobs prioritized by an operator with the job management tools and jobs sent via the direct connecti...

  • Page 17

    P reparing for f iery exp4110 s etup 17 • controlling print jobs from the job management tools • overriding job settings • clearing the fiery exp4110 of all job data • setting default settings for print options operator privileges operator control includes control of print jobs from the job manageme...

  • Page 18

    P reparing for f iery exp4110 s etup 18 control level examples the following table shows how print connections, passwords, and webtool access are used together to create varying levels of security. The columns between minimum security and maximum security represent increasing levels of security. E-m...

  • Page 19

    P reparing for f iery exp4110 s etup 19 group printing (member printing) this feature allows you to define group names and passwords that users must enter in order to print a job. The user enters the group name and password from the printer driver, or from an override in command workstation. The gro...

  • Page 20

    P reparing for f iery exp4110 s etup 20 connecting network cable to the fiery exp4110 this section includes an illustration of the fiery exp4110 back panel, and provides information about connecting the fiery exp4110 to the network. Back view of the fiery exp4110 ethernet connection for ethernet con...

  • Page 21: About Setup

    P reparing for f iery exp4110 s etup 21 about setup setup configures the fiery exp4110 to communicate with other devices and to manage print jobs. Perform setup the first time you turn on the fiery exp4110 after new system software is loaded, or any time server software is reinstalled. An initial se...

  • Page 22: Etting

    S etting up the f iery exp4110 from the c ontrol p anel 22 s etting up the f iery exp4110 from the c ontrol p anel setup is required the first time the fiery exp4110 is turned on after new system software is loaded. In this initial setup, you (or the service technician who loads the software) choose...

  • Page 23: Fiery Exp4110 Control Panel

    S etting up the f iery exp4110 from the c ontrol p anel 23 fiery exp4110 control panel use the fiery exp4110 control panel to view status information, print system pages, and set up printing. While most elements in the control panel have counterparts in command workstation, you can view current func...

  • Page 24

    S etting up the f iery exp4110 from the c ontrol p anel 24 buttons display window the display window provides information about the status of the fiery exp4110, displays menu information, and allows you to view and edit information in the setup menus. The status area at the bottom of the display win...

  • Page 25

    S etting up the f iery exp4110 from the c ontrol p anel 25 rip status when the fiery exp4110 is processing a job, the rip status screen appears. This screen displays the following: cancel job: press the top line selection button to cancel the job currently processing. The fiery exp4110 cancels the j...

  • Page 26

    S etting up the f iery exp4110 from the c ontrol p anel 26 functions menu the functions menu provides many of the options available from command workstation. Choose the following commands from this menu: print pages print system pages from the fiery exp4110. You can print the following pages from th...

  • Page 27

    S etting up the f iery exp4110 from the c ontrol p anel 27 secure print allows users to control secure print jobs. To access secure print jobs, a password is required. The user defines and enters the password in the secure print option from the windows 2000/xp/server 2003 or mac os x printer driver....

  • Page 28

    S etting up the f iery exp4110 from the c ontrol p anel 28 accessing setup options t o access s etup when the f iery exp4110 is i dle 1 make sure the information screen on the control panel reads idle. If printing or ripping appears, the fiery exp4110 is processing, and you must wait until the syste...

  • Page 29

    S etting up the f iery exp4110 from the c ontrol p anel 29 types of setup screens there are two types of setup options: to cancel without saving changes, press the menu button. This cancels what you are doing in the current screen to bring you to the next higher-level menu. You may need to press the...

  • Page 30: Server Setup Options

    S etting up the f iery exp4110 from the c ontrol p anel 30 server setup options the server setup menu lets you specify system information that pertains to the fiery exp4110 and all users. To access the menu, follow the instructions on page 28 . When you choose server setup, the options appear in seq...

  • Page 31

    S etting up the f iery exp4110 from the c ontrol p anel 31 use character set macintosh/dos/windows [macintosh] specify whether the control panel and command workstation should use the macintosh, dos, or windows character set for displaying file names. This is important if file names include accented...

  • Page 32: Network Setup Options

    S etting up the f iery exp4110 from the c ontrol p anel 32 suspend on mismatch yes/no [no] select yes if you want the fiery exp4110 to hold a job if the job cannot print because of missing resources. While the job is suspended, other jobs continue to process and print. Save changes yes/no [yes] sele...

  • Page 33

    S etting up the f iery exp4110 from the c ontrol p anel 33 t o access n etwork s etup options 1 confirm that the network cable is connected to the fiery exp4110. During network setup, the fiery exp4110 queries the network for zones, servers, and server- based queues. If you perform network setup wit...

  • Page 34

    S etting up the f iery exp4110 from the c ontrol p anel 34 ethernet speed auto detect/1 gbps/100 mbps full-duplex/100 mbps half-duplex/10 mbps full-duplex/ 10 mbps half-duplex [auto detect] select an appropriate setting according to the settings of the network to which the fiery exp4110 is connected...

  • Page 35

    S etting up the f iery exp4110 from the c ontrol p anel 35 when you set an ip address, subnet mask, or gateway address for the fiery exp4110 during setup, you can allow the fiery exp4110 to get these addresses automatically from a dhcp or bootp server. First, turn on or restart the fiery exp4110 and...

  • Page 36

    S etting up the f iery exp4110 from the c ontrol p anel 36 ip address [127.0.0.1] enter the fiery exp4110 ip address for ethernet. This ip address, unlike an ip address set automatically, remains the same if you restart the fiery exp4110. You must change the default to a valid address for your netwo...

  • Page 37

    S etting up the f iery exp4110 from the c ontrol p anel 37 secondary dns server ip address 0.0.0.0 specify the ip address of the secondary dns server. Domain name enter the dns domain name. Host name enter the dns host name of the fiery exp4110. This option is available only if you set get dns addre...

  • Page 38

    S etting up the f iery exp4110 from the c ontrol p anel 38 edit entry yes/no [no] this option allows you to make changes to ip addresses or a range of ip addresses to be permitted or rejected. Ip port setup all ports not listed in the following setup options are closed. Supported protocols are liste...

  • Page 39

    S etting up the f iery exp4110 from the c ontrol p anel 39 ipx/spx setup options to specify the frame types the fiery exp4110 uses for ipx/spx protocols, choose ipx/spx setup from the protocol setup menu. You must choose at least one frame type to enable ipx/ spx protocols. The fiery exp4110 support...

  • Page 40

    S etting up the f iery exp4110 from the c ontrol p anel 40 lpd setup options enable lpd yes/no [yes] select yes to allow lpd printing. Pserver setup options n ote : if you do not use pserver setup, continue with the remaining service setup menus starting with “windows setup options” on page 48. Enab...

  • Page 41

    S etting up the f iery exp4110 from the c ontrol p anel 41 the main objective of nds setup is to specify the print server object. In addition, you can indicate the location of the fiery exp4110 print queues. N ote : the terms netware server, novell server, and ipx server are in common use and are us...

  • Page 42

    S etting up the f iery exp4110 from the c ontrol p anel 42 in each subsequent browse screen, the top line represents your current location. The second line contains: • a list of objects in the current container directly below your current location • the symbol “..” to go up one level with an object ...

  • Page 43

    S etting up the f iery exp4110 from the c ontrol p anel 43 if you select entire nds tree, choosing ok returns to pserver setup. Proceed with bindery setup (see page 43 ), set the polling interval (see page 47 ), or choose exit pserver setup to return to the service setup menu. Browse to the root of ...

  • Page 44

    S etting up the f iery exp4110 from the c ontrol p anel 44 bindery setup menu because you can set up more than one novell server to handle fiery exp4110 print jobs, an additional menu is displayed for this purpose. The options are as follows: • add file server creates a new file server connection to...

  • Page 45

    S etting up the f iery exp4110 from the c ontrol p anel 45 choose search by name if the number of file servers is so large that scrolling through the list would take a long time. Once you have chosen a file server, the fiery exp4110 immediately tries to log in as a guest without a password. If it su...

  • Page 46

    S etting up the f iery exp4110 from the c ontrol p anel 46 netware print server print server name select the name of the print server that you configured in the netware utility pconsole. This print server will route print jobs to the fiery exp4110 from computers on ipx networks. Print server passwor...

  • Page 47

    S etting up the f iery exp4110 from the c ontrol p anel 47 enter your print server password this option appears only if your netware print server is password protected. Enter your print server password. The bindery setup menu is displayed again. You can edit other connections, choose another bindery...

  • Page 48

    S etting up the f iery exp4110 from the c ontrol p anel 48 netware server poll interval in seconds 1–3600 [15] specify the interval, in seconds, at which the fiery exp4110 communicates with the novell print server to see if there are print jobs waiting. N ote : if you select a short interval, the am...

  • Page 49

    S etting up the f iery exp4110 from the c ontrol p anel 49 workgroup or domain if you choose no for use automatic configuration, enter the name of the workgroup or domain. Use wins name server yes/no [no] broadcasts from smb devices cannot pass across a router without a wins name server. Setting up ...

  • Page 50

    S etting up the f iery exp4110 from the c ontrol p anel 50 web services setup enable web services yes/no [yes] select yes to make the webtools available to users. Tcp/ip must be enabled on the fiery exp4110 and on user workstations. A java-enabled web browser and a valid ip address or dns host name ...

  • Page 51

    S etting up the f iery exp4110 from the c ontrol p anel 51 e-mail setup enable e-mail services yes/no [no] this option enables the fiery exp4110 to use e-mail or internet fax as a means of communication for a variety of purposes including printing postscript, pdf, or tiff file. The fiery exp4110 ser...

  • Page 52

    S etting up the f iery exp4110 from the c ontrol p anel 52 fiery e-mail domain name this option appears only if you have selected yes to enable remote diagnostics. For more information, see the documentation that accompanies your printer. Enter the mail box name specified on the mail server. The cli...

  • Page 53

    S etting up the f iery exp4110 from the c ontrol p anel 53 ftp setup using ftp printing options, you can enable the fiery exp4110 to serve as an ftp server. N ote : ftp printing is supported for windows, mac os, unix, linux and other operating systems supporting the ftp protocol. The fiery exp4110 s...

  • Page 54

    S etting up the f iery exp4110 from the c ontrol p anel 54 ftp printing enable ftp printing yes/no [yes] select yes to enable ftp printing on the fiery exp4110. Require password for printing yes/no [no] select yes to specify a user password for ftp printing. From the fiery exp4110 control panel, you...

  • Page 55

    S etting up the f iery exp4110 from the c ontrol p anel 55 ldap setup the fiery exp4110 supports the following for ldap servers: • lotus domino server 5.0.6a or later • netware 5.X server or later • windows 2000/server 2003 server with active directory service loaded. The time difference delay betwe...

  • Page 56: Printer Setup Options

    S etting up the f iery exp4110 from the c ontrol p anel 56 password: type the password for access to the ldap server. This information is used if the authentication method is simple or gssapi. If you use gssapi authentication, the password is encrypted when it is sent across the network. Domain: typ...

  • Page 57: Exit Setup

    S etting up the f iery exp4110 from the c ontrol p anel 57 in the following list of options, default values, where applicable, appear in brackets. N ote : for users to access the utilities and webtools or print to the fiery exp4110 over a tcp/ip network, you must publish at least the hold queue or t...

  • Page 58

    S etting up the f iery exp4110 from the c ontrol p anel 58 administrative functions in the setup menu the remaining choices in the setup menu are intended to help you manage print jobs, but are not required for printing. For information about see job log setup page 85 change password page 81 clear s...

  • Page 59: Etting

    S etting up the f iery exp4110 from a network computer 59 s etting up the f iery exp4110 from a network computer to specify network settings and print option default settings, you must perform setup. To use any of the setup applications, you must enter the fiery exp4110 administrator password. When ...

  • Page 60

    S etting up the f iery exp4110 from a network computer 60 the setup window appears. You see the available settings only when you select the particular option. For example, to view or change the setting for the character set option, click character set. The available settings appear at the bottom of ...

  • Page 61: General/server Options

    S etting up the f iery exp4110 from a network computer 61 3 choose setup from the server menu. Regardless of the remote setup method you use, the following dialog box appears. The remote setup interface for command workstation and configure is identical. For information about most remote setup optio...

  • Page 62

    S etting up the f iery exp4110 from a network computer 62 job log page size selects a paper size for the printed job log. Enable printed queue enables the printed queue, a storage location on the fiery exp4110 hard disk for recently printed jobs. You can reprint jobs from the printed queue without r...

  • Page 63: Network Setup

    S etting up the f iery exp4110 from a network computer 63 network setup network setup configures the fiery exp4110 to receive print jobs over the networks used at your site. If the fiery exp4110 is configured to enable more than one protocol, it automatically switches to the correct protocol when it...

  • Page 64

    S etting up the f iery exp4110 from a network computer 64 protocols you can change appletalk, ipx/spx, and tcp/ip protocol settings for the fiery exp4110. When you click the modify or advanced button next to the setting, the system windows xp control panel (local area connection properties) opens, w...

  • Page 65

    S etting up the f iery exp4110 from a network computer 65 n ote : confirm the subnet mask setting with your network administrator before proceeding. In some cases, the required setting may be different from those listed. If your tcp/ip network has a gateway and users outside the gateway plan to prin...

  • Page 66

    S etting up the f iery exp4110 from a network computer 66 netware printing options the following procedures for setting up netware printing describe these parts: • nds setup • bindery setup • poll interval setting up the fiery exp4110 for nds printing only one nds tree can be connected. To specify o...

  • Page 67

    S etting up the f iery exp4110 from a network computer 67 2 in the nds connection dialog box, double-click an nds tree in the list on the left. 3 navigate to the nds container and click ok. If necessary, enter the password. 4 select a container from the containers list..

  • Page 68

    S etting up the f iery exp4110 from a network computer 68 5 double-click a print server from the select print server list. The full path to the print server appears. Another way to change the path is to click edit and type the path to the print server. 6 click ok. The server setup dialog box appears...

  • Page 69

    S etting up the f iery exp4110 from a network computer 69 bindery setup from the network setup tab in local setup, specify bindery services. The currently connected servers are displayed. A maximum of eight bindery servers can be connected. To add, remove, or change bindery connections, click modify...

  • Page 70

    S etting up the f iery exp4110 from a network computer 70 3 select a print server from the select print server list, and click add. The name of the newly added server appears in the connected servers list. To add another server, repeat the preceding steps. You can connect a maximum of eight servers....

  • Page 71

    S etting up the f iery exp4110 from a network computer 71 pserver poll interval specify the polling interval (in seconds) for netware printing. Lpd printing enable lpd printing service enables or disables lpd printing services. Windows print sharing with server message block (smb) enable windows pri...

  • Page 72

    S etting up the f iery exp4110 from a network computer 72 snmp setup enable snmp to allow remote access to the configure webtool and other fiery exp4110 features. T o configure snmp settings 1 to restore the fiery exp4110 to its original snmp settings, click restore snmp configuration. 2 select enab...

  • Page 73

    S etting up the f iery exp4110 from a network computer 73 port 9100 printing enable port 9100 enables applications to open a tcp/ip socket to the fiery exp4110 at port 9100 to download a print job. Port 9100 queue allows you to attach port 9100 to any of the published fiery exp4110 print connections...

  • Page 74: Printer Setup Options

    S etting up the f iery exp4110 from a network computer 74 connection timeout (seconds) allows you to specify the maximum amount of time that elapses before the fiery exp4110 stops attempting to connect to the mail server. Polling interval (seconds) allows you to specify how often the fiery exp4110 c...

  • Page 75: Exiting Setup

    S etting up the f iery exp4110 from a network computer 75 vdp search path use this option to specify the search path for objects used by variable data printing. You can set a global path for common objects, ppml (personalized print markup language), and vps (variable print specification). Ps setup a...

  • Page 76: Etup

    S etup option reference 76 s etup option reference this chapter describes the default settings that you can set for options in ps (postscript) setup and pcl setup. Depending on the setup application that you use, not all options are available. For more information about these options, see print opti...

  • Page 77

    S etup option reference 77 font pitch (char/in) 0.44-99.99 (default is 10.00) if the default pcl font selected in font number represents a fixed pitch scalable font, determine the width of scalable type. Pitch is measured by characters per inch, so 10-pitch type fits ten characters per inch. Font si...

  • Page 78: Onfiguring

    C onfiguring w eb t ools 78 c onfiguring w eb t ools webtools allow you to manage your fiery exp4110 remotely from the internet or from your company’s intranet. The fiery exp4110 has its own home page, from which you can select the webtool that you want to use. For information about using webtools, ...

  • Page 79: Dministering

    A dministering the f iery exp4110 79 a dministering the f iery exp4110 this chapter provides tips on managing fiery exp4110 printing. Administrator functions administration features are included with the user software and are built into the fiery exp4110. The following table describes where to find ...

  • Page 80

    A dministering the f iery exp4110 80 setting printer default settings page 76 printing from windows printing from mac os publishing the direct connection, print queue, or hold queue to end users on various platforms printer setup, page 9 , and page 74 setting up printing, installing postscript print...

  • Page 81: Setting Passwords

    A dministering the f iery exp4110 81 setting passwords you can set or change the passwords for the fiery exp4110. Anyone with the administrator password can modify the setup options, and control the flow and order of print jobs with the job management tools. Administrator allows you access to setup....

  • Page 82

    A dministering the f iery exp4110 82 passwords from a network computer you can change the administrator and operator passwords from configure or command workstation, windows edition. T o set or change a password 1 select the password that you want to change. 2 type the password in both the enter new...

  • Page 83: Updating System Software

    A dministering the f iery exp4110 83 3 click ok. The new password, fiery.2, is now set. Updating system software the fiery exp4110 uses unique system software to receive and process jobs and send job data to the printer. Resident on the fiery exp4110, system software processes and controls the spool...

  • Page 84

    A dministering the f iery exp4110 84 t o check for software updates from l ocal setup 1 in command workstation, right-click fierybar and select set up fiery. 2 type the administrator password and click ok. 3 on the general setup tab, click system update. 4 click modify settings. 5 select enable auto...

  • Page 85: Configuring The Job Log

    A dministering the f iery exp4110 85 configuring the job log the job log is a record of all jobs processed or printed on the fiery exp4110, whether they originate from a user workstation, a networked server, or the fiery exp4110. You can print the job log from the control panel or from the job manag...

  • Page 86: Clearing The Fiery Exp4110

    A dministering the f iery exp4110 86 clearing the fiery exp4110 the clear server command allows you to clear all queued print jobs from the fiery exp4110 print, hold, and printed queues. Jobs can also be deleted, either individually or as a group, using command workstation. Clear server also clears ...

  • Page 87

    A dministering the f iery exp4110 87 saving and restoring fiery exp4110 configuration you can save the current configuration of the fiery exp4110 and restore it later, if necessary. The following settings are saved (if your fiery exp4110 supports them): • settings made in setup (except server name) ...

  • Page 88

    A dministering the f iery exp4110 88 managing e-mail address books the e-mail service feature allows you to import a list of e-mail/internet fax addresses to the fiery exp4110. To import the list of addresses, you send e-mail messages in a particular format to the fiery exp4110. The list will be add...

  • Page 89

    A dministering the f iery exp4110 89 task administrator subject field administrator message field fiery e-mail response subject field fiery e-mail response message field to retrieve a specific address book #getaddressbook name of address book for example: #getaddressbook admin address book name of a...

  • Page 90

    A dministering the f iery exp4110 90 t o retrieve an address book from the f iery exp4110 1 start your e-mail application. 2 open a new message window. 3 type the e-mail address of your print server in the to line. 4 type the command of a specified address in the subject line. For the user, type “#g...

  • Page 91: Ftp Printing

    A dministering the f iery exp4110 91 ftp printing after you set up ftp printing, you can specify the user name and password from command workstation for ftp printing. T o define a user name and password for ftp printing from c ommand w ork s tation 1 start command workstation and connect to the fier...

  • Page 92: Setting Up Printing Groups

    A dministering the f iery exp4110 92 setting up printing groups the fiery exp4110 administrator can arrange users into groups and allow members of a group to print only if they supply a password at print time. This method of printing is known as printing groups, or member printing. This section desc...

  • Page 93

    A dministering the f iery exp4110 93 printing the configuration page the configuration page lists the settings in effect for the current setup. After you have performed setup, print a configuration page to confirm your settings. Post the current configuration page near the fiery exp4110 for quick re...

  • Page 94

    A dministering the f iery exp4110 94 maintaining optimal fiery exp4110 performance the fiery exp4110 does not require maintenance. Beyond the obvious requirements of servicing and maintaining the printer and replenishing consumables, you can improve the overall performance of your system by doing th...

  • Page 95

    A dministering the f iery exp4110 95 shutting down, rebooting, and restarting the fiery exp4110 generally, you can leave the fiery exp4110 and the printer running all the time. This section describes how to shut down, reboot, and restart the fiery exp4110 when necessary. Shutting down the fiery exp4...

  • Page 96

    A dministering the f iery exp4110 96 5 at the log on to windows dialog box, type administrator in the user name field, type the password, and the press enter. The password is case-sensitive and must be entered exactly. 6 wait for fierybar to appear on the monitor and reach idle. The fiery exp4110 ta...

  • Page 97: Roubleshooting

    T roubleshooting 97 t roubleshooting this chapter provides troubleshooting tips. Troubleshooting the fiery exp4110 startup diagnostics are described in the documentation for service technicians. Contact your authorized service/support center if you see startup error messages on command workstation o...

  • Page 98

    T roubleshooting 98 for the appropriate name, see the following table. Confirming the printer connection to the fiery exp4110 t o confirm the printer connection to the f iery exp4110 1 print a printer test page to verify the printer is functioning normally. 2 turn off the printer and connect the int...

  • Page 99

    T roubleshooting 99 cannot connect to the fiery exp4110 with utilities if users cannot connect to the fiery exp4110, check the following: fiery exp4110 setup: the appropriate network protocol must be enabled, with the correct parameters (for example, for tcp/ip, the ip address). You must publish eit...

  • Page 101: Ndex

    I ndex 101 numerics 1000baset 20 100baset 20 10baset 20 a access level scenarios 18 access to network and software 15 accessing setup from control panel 22 from network computer 59 account name option 52 activity light control panel 23 add entry option, security setup 37 add file server option 44 ad...

  • Page 102

    I ndex 102 clear server option 86 clearing the job log 61, 85 client setup overview 10 webtools 78 command workstation problems connecting to server 99 setup from 59 comment option, windows printing 49, 71 configuration page determining ipx frame types bound 39 printing 93 printing from the control ...

  • Page 103

    I ndex 103 enable lpd option 40, 71 enable mailbox passwords option 31 enable nds option 41, 66 enable port 9100 print services option 50, 73 enable preview option 62 enable print via e-mail option 73 enable printed queue option 31, 62 enable printing groups option 31, 62 enable proxy setup option 5...

  • Page 104

    I ndex 104 ip address option 36 ip filtering options 37 ip port setup 38 ipp setup 50 ipx (novell) bindery file server, connecting 43 nds (novell directory services) 39, 65 overview of printing 12 terms used to describe 43 ipx/spx polling interval 71 protocol setup 39 selecting frame types 39 setup ...

  • Page 105

    I ndex 105 network installation summary 11 network setup exiting 33 from network computer 63 to 73 new password option 81 novell, see netware o operator password 81 privileges 17 orientation option 76 outgoing mail server option, e-mail setup 73 outgoing server option, e-mail setup 51 p paper size f...

  • Page 106

    I ndex 106 privacy, snmp 72 problems, see troubleshooting protocols for assigning ip address automatically 35 network 9 setting up 34, 64 see also appletalk, ipx, ipx/spx, tcp/ip proxy server ip address option 53 proxy server port number option 53 proxy server timeout option 53 proxy server user nam...

  • Page 107

    I ndex 107 setup screen types 29 see also server setup, network setup, printer setup, ps setup, job log setup setup from control panel accessing 22 administrative functions 58 job log setup 85 network setup 32 port setup 33 printer setup 56 protocol setup 34 to 39 security setup 37 server setup 30 s...

  • Page 108

    I ndex 108 u unix on tcp/ip network 13 printcap file 98 remote printer name 98 up button 24 updating system software 62 use automatic configuration option 48 use character set option 31, 62 use wins name server option 49 utilities enabling protocol on the server 35 required print connections 57 v vd...