Xerox Xerox 4112 User Manual - page 38
X e r o x 4 11 2 / 4 1 2 7 P o s t S c r i p t U s e r G u i d e
2 - 1 0
2 . W i n d o w s M e
Hole Punching
Specify the number of holes to punch. Select from "Use Printer
Settings," "2 Holes," or "4 Holes."
If "3 Holes" is selected for "Hole Puncher Setup" on the "Device
Settings" tab, only "Use Printer Settings" will be available for
selection. "Device Settings" tab is displayed on the print driver
screen when "Properties" is selected from the menu of the printer
icon in the "Printers" folder.
Folding
Select the folding method.
NOTE: "Z Fold," "Z Tri-Fold," and "C Tri-Fold" will be available
when the Tri-Fold Output Tray is installed and set up in the
"Options" tab.
"Bi-Fold" is available when a Booklet Tray is installed and set up in
the "Device Settings" tab.
Double Print
Enable this feature to repeatedly print one page twice on a paper
with a bigger size than the original. You can use Double Print
feature if you have set the zoom ratio to 100% with the following
paper size and output size settings.
•
Paper Size
•
Output Size
•
A4
•
A3
•
A5
•
A4
•
B5
•
B4
•
Folio (8.5 x 11")
•
Ledger (11 x 17")
Booklet Creation
Specify the assembling and finishing methods for booklet creation.
You can check the result of the change in setting on the preview
image at the top right of the screen.
KEY POINT: "Booklet Creation" feature will only be available if
"Automatically Select" or "Auto Paper Select (Type)" is selected in
"Paper Source" on the "Paper" tab.
Output Size for Booklet
Creation
Specify the output size for booklet creation printing.
When "Booklet Creation" is selected, only "AutoSelect Tray" and
"Auto Paper Select (Type)" are available in "Paper Source" on the
"Paper" tab. Conversely, "Booklet Creation" feature is only
available when "Automatically Select" or "Auto Paper Select
(Type)" is selected in "Paper Source."