Xexun TK-102 User Manual

Other manuals for TK-102: User Manual, User Manual, User Manual
Manual is about: GSM/GPRS/GPS TRACKER

Summary of TK-102

  • Page 1

    1 gsm/gprs/gps tracker user manual u preface thank you for purchasing gps tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without prio...

  • Page 2: Content

    2 content 1 summary ---------------------------------------------------------------------------------- 3 2 application --------------------------------------------------------------------------------- 3 3 hardware description 3.1 front face -----------------------------------------------------------...

  • Page 3: 1 Summary

    3 1 summary working based on existing gsm/gprs network and gps satellites, this product can locate and monitor any remote targets by sms or gprs. 2 applications z rental vehicle / fleet management etc z protect the child / the old / the disabled / pet etc z protect businessmen z personnel management...

  • Page 4: 4 Specs.

    4 3.4 bottom face 3.5 interior 4 specs. Content specs. Dimension. 64mm x 46mm x 17mm(1.8”*2.5”*0.65”) weight 50g network gsm/gprs band 850/900/1800/1900mhz or 900/1800/1900mhz gps chip sirf3 chip gsm/gprs module simcom300/simcom340 gps sensitivity -159dbm gps accuracy 5m time to first fix cold statu...

  • Page 5: 5 Usage

    5 5 usage 5.1 sim card installation make sure that there is no call transfer and call display is on , and pin code off . The sms message must in text format, can’t be identified for pdu format. Steps: 1 open the rear cover, and pick out the battery. 2 push the foil along and turn it left. 3 put the ...

  • Page 6

    6 5.3 startup z put the sim card and battery in place. Z the unit turns on automatically when the sim card and battery is inserted. Z for first use, please initialize the unit and restore it to default setting.( please refer to 5.4 for instruction.) z in 10 or 40 seconds, the unit will begin to work...

  • Page 7

    7 5.6.1 setup: call the tracker for 10 times, it will make the cell phone number as the authorized number automatically. 5.6.2 setup: send sms admin+password+space+cell phone number to set up a authorized number. The other authorized numbers should be set by the first authorized number. If the numbe...

  • Page 8

    8 5.8 auto-track report a geo-info at 30s intervals to the authorized numbers for 5 times: 5.8.1 setup: send sms t030s005n+password to the unit, it will report the geo-info at 30s intervals for 5 times.(s: second, m: minute, h: hour). The setting must be in 3 digits and at maximum 255 in value. 5.8....

  • Page 9

    9 set the restricted district. In case of breach, it will send sms “stockade!+geo-info” to the authorized numbers. Remark: the first latitude&longitude is coordinate of the top left corner of the geo-fence, while the second latitude&longitude is the coordinate of the bottom right corner. It will ala...

  • Page 10

    10 the tracker will check the speed in 10 minutes interval and alarm if it is overspeed. 5.14 imei checking: send sms imei+password to the unit to check the imei number of the tracker. 5.15 sos button press the sos for 3 second, it will send “ help me !+ geo-info” to all the authorized numbers every...

  • Page 11

    11 5.18.2 cancel: send sms noadminsms+password to cancel the sms center. Response sms format: authorized number+geo-info 5.19 gprs setting in order to use gprs function, the user needs to set ip, port and apn ( access point name ) by either cell phone, or our pc software. ( note: some countries or r...

  • Page 12

    12 is set. 5.19.5 gprs transport protocols as soon as the ip & port & apn are set up, the user can make a call or send sms to tracker. The tracker will hand up and report the coordinates to ip address. The message format sent by tracker to ip address is as following: serial number + authorized numbe...

  • Page 13

    13 6 cautions please comply with the instructions to extend the unit life: 1. Keep the unit dry. Any liquid, i.E. Rain, moisture, may destroy or damage the inside circuitry. 2. Don’t use & store the unit in dusty places. 3. Don’t put the unit in overheated or overcooled places. 4. Handle carefully. ...