Xexun TK-102 User Manual

Other manuals for TK-102: User Manual, User Manual, User Manual
Manual is about: GSM/GPRS/GPS TRACKER

Summary of TK-102

  • Page 1

    1 gsm/gprs/gps tracker user manual uu preface thank you for purchasing gps tracker. This manual shows how to operate the device smoothly and correctly. Make sure to read this manual carefully before using this product. Please note that specification and information are subject to changes without pri...

  • Page 2: Commands      ----

    2 3 hardware description 3.1 front face -------------------------------------------------------------------------------------- 3 3.2 rear face ------------------------------------------------------------------------------------- 3 3.3 side face -------------------------------------------------------...

  • Page 3: 1 Summary

    3 1 summary working based on existing gsm/gprs network and gps satellites, this product can locate and monitor any remote targets by sms or gprs. 2 applications l rental vehicle / fleet management etc l protect the child / the old / the disabled / pet etc l protect businessmen l personnel management...

  • Page 4: 3.5 Interior

    4 3.5 interior 4 specs. Content specs. Dim. 64mm x 46mm x 17mm(1.8 ”*2.5”*0.65”) weight 50g network gsm/gprs band 850/ 900/1800/1900mhz gps chip sirf3 chip gsm/gprs module simcom900 gps sensitivity -159dbm gps accuracy 5m time to first fix cold status 45s warm status 35s hot status 1s car charger 12...

  • Page 5: 5 Usage

    5 5 usage 5.1 sim card installation make sure that there is no call transfer and call display is on , and pin code off. The sms message must in text format, can ’t be identified for pdu format. Steps: 1 open the rear cover, and pick out the battery. 2 push the foil along and turn it left. 3 put the ...

  • Page 6: 5.4 For Instruction.)

    6 5.4 for instruction.) l in 10 or 40seconds, the unit will begin to work and acquire the gsm signals as well as the gps signals. The indicator will keep flashing every 4 seconds when the unit has received the signals, otherwise it will keep on. L when this unit receives gps signals normally, you ca...

  • Page 7: ’S Requirement)

    7 5.6.4 for roaming purpose, you have to add your country code ahead of the cell phone number, for example, please send admin123456 008613322221111 to tracker to set 13322221111 as an authorized number. 5.6.5 when an authorized number dials up the unit, it will hang up and report a real-time geo-inf...

  • Page 8: 5.7 Real-Time Polling

    8 5.7 real-time polling 5.7.1 if there is no authorized number, when any number dials up the unit, it will report a geo-info; if there is already an authorized number, then it will not respond when an unauthorized number calls it up. 5.7.2 when an authorized number dials up the unit, it will hang up...

  • Page 9: 5.11 Geo-Fence

    9 5.11 geo-fence set up a geo-fence for the unit to restrict its movement within a district. The unit will send message to the authorized numbers when it moves out of the district. Notes: this function will be invalid if the unit moves outside the district. You need to re-set it if you want this fun...

  • Page 10: 5.13 Overspeed Alert:

    10 5.13 overspeed alert: this function is using for the owner to control the target ’s speed. 5.13.1 set up: send sms speed+password+space+080 to the unit (suppose the speed is 80km/h), and it will reply “speed ok!”. When the target moves exceeding 80 km/h, the unit will send sms speed+080!+geo-info...

  • Page 11: 5.17 Hidden Number Tracking

    11 5.17 hidden number tracking when a hidden authorized number calls the tracker, the tracker will reply sms with the hidden number&geo-info to all the authorized numbers. 5.17.1 send sms “hide number” to set up the hidden number. 5.17.2 send sms “nohide number” to delete the hidden number. 5.18 sms...

  • Page 12: 5.21 Sd Card Function

    12 5.20.3 send sms shake+password+space+10 is the strongest level of intensity.The tracker will send alert if someone touchs the unit slightly. 5.20.4 cancel: send sms shake+password+space+0 to remove this function. 5.21 sd card function a mini sd card can be put in the tracker ’s sd card slot. The ...

  • Page 13: 5.22.2 Set Apn

    13 5.22.2 set apn setup: send sms apn+123456+space+specify apn content. If setup successful, the tracker will reply sms “apn ok”. Cancel: the old apn will be invalid automatically when a new apn is set. 5.22.3 set apn ’s user name setup: send sms apnuser+123456+space+the sim card ’s user name. If se...

  • Page 14

    14 13145826175=== authorized number gprmc,070718.000,a,2234.0228,n,11403.0764,e,0.00,,070909,,,a*73,==gpsmode ’ s original gprmc sentences f=== full gps signal l=== no gps signal imei:354776030042714==the tracker ’s imei number 05===get 5 gps number 50.1=== altitude f:4.11v===full battery power l:3....

  • Page 15: Notes:

    15 notes: ◆our gprs supports tcp or udp protocol, so please confirm whether your gprs webserver supports tcp or udp protocol before having the order. ◆ please use the sim card which is with gprs function. ◆ pls use the following sms to set up gmt time in the sms for the tracker time zone+password+sp...

  • Page 16: 7 Faults & The Solutions

    16 7 faults & the solutions faults solution startup fail check the battery and see if it is fully charged or correctly installed. Hangup fail in existence of an authorized number, an unauthorized number dials up the unit. Please initialize the unit and re-set up the authorized numbers. Monitor fail ...

  • Page 17

    17 tlimit function tlimit123456 100 cancel tlimit function tlimit123456 0 gsm id motion sensor shake123456 0-10 (0 means off,1 means the lowest sensitive, 10 means the highest sensitive) activate sd card function sdlog123456 1 deactivate sd card function sdlog123456 0 send data in the sd card to the...