Xexun TK-102 User Manual - 5.4 For Instruction.)
6
5.4 for instruction.)
l In 10 or 40seconds, the unit will begin to work and acquire the GSM signals as well as
the GPS signals. The indicator will keep flashing every 4 seconds when the unit has
received the signals, otherwise it will keep on.
l When this unit receives GPS signals normally, you can use it and do all the following
settings.
5.4 Initialization
Send
“begin+password” in SMS to the unit, it will reply
“begin ok ” and initialize all the
settings. (default password: 123456)
5.5 Change the Password
Send SMS password+old password+space+new password to change the password.
Remark:
5.5.1 Be sure keep the new password in mind, you have to upload the software to restore
the original setting in case of losing the new password.
5.5.2 Make sure the new password is in 6 digits, or else the tracker can not recognize the
password.
5.6 Authorization
There are only 5 numbers able to be authorized.
5.6.1 Call the tracker for 10 times, it will make the cell phone number as the authorized
number automatically.
5.6.2 Send SMS admin+password+space+cell phone number to set up a authorized
number. The other authorized numbers should be set by the first authorized number. If
the number is successfully authorized, the unit will reply
“admin ok!” in SMS.
5.6.3 Send SMS noadmin+password+space+authorized number to delete the authorized
number.
PDF 文件使用 "pdfFactory Pro" 试用版本创建