Xexun TK-102 User Manual - 5.21 Sd Card Function
12
5.20.3 Send SMS shake+password+space+10 is the strongest level of intensity.the
tracker will send alert if someone touchs the unit slightly.
5.20.4 Cancel: Send SMS shake+password+space+0 to remove this function.
5.21 SD card function
A mini SD card can be put in the tracker
’s SD card slot. The GPRS data can be saved in
the SD card if GPRS is off. It will send data to the GPRS server again if GPRS is on.
5.21.1 Setup: Send SMS sdlog123456 1 to the tracker to activate the function of storing
data in SD card;
Cancel: Send SMS sdlog+password+0 to the tracker to deactivate the function of
storing data in SD card.
5.21.2 Setup: Send SMS readsd+password+space+1 to ask the tracker to send data in
the SD card to the GPRS server.
Cancel: Send SMS readsd+password+space+0 to ask the tracker to stop sending data
in the SD card to the server.
5.22 GPRS Setting
In order to use GPRS function, the user needs to set IP, Port and APN ( access point
name ) by either cell phone, or our PC software.
( NOTE:
Some countries or regions should set APN
’s User Name and APN
’s
Password.)
5.22.1 Set an IP address and port:
Setup: Send SMS adminip+123456+space+IP address+space+port.
If setup successful, the tracker will reply SMS
“adminip ok”
Cancel: Send SMS noadminip+123456
PDF 文件使用 "pdfFactory Pro" 试用版本创建