Xexun TK-102 User Manual - 5 Usage
5
5 Usage
5.1 SIM card installation
Make sure that there is no call transfer and call display is on , and PIN code off. The
SMS message must in Text format, can
’t be identified for PDU format.
Steps:
1 Open the rear cover, and pick out the battery.
2 Push the foil along and turn it left.
3 Put the SIM card into the holder, and turn the foil right and fasten it in place.
5.2 Battery and Charger
Do charge the battery to capacity in 8 -12 hours for first use. Please use the battery and
charger provided by the manufacturer. This unit adopts built-in Li-ion battery, and full
battery will support around 48 hours use on end. After first use, the battery can be
charged fully in 3-5hours.
Cautions:
a: For it
’s Li-ion battery, which contains harmful chemicals and may burst, please don ’t
bump, puncture it violently and keep it off fire.
b: Please charge the battery in time to keep it working normally.
5.3 Startup
l Put the SIM card and battery in place.
l Turn on the unit outdoors by pressing the
“on/off” button until the indicator is on.
l For first use, please initialize the unit and restore it to default setting.( please refer to
PDF 文件使用 "pdfFactory Pro" 试用版本创建