Xiamen Rongta Technology 300 Series User Manual - page 13
Xiamen Rongta Technology Co., Ltd.
www.rongtatech.com
12
light) will keep flashing from left to right repeatedly till the charging is finished and
the charge indicator is keep lighting.
4.3 Printer Connecting and Printing
4.3.1 USB Interface Connecting
Printer's optional accessories contain USB Wire, Connect to PC and install the
USB driver.
4.3.2 WI-FI Communication
User could use wireless network technology to connect with your equipment for
date communication.
Wi-Fi, owned by Wi-Fi Alliance, is a brand of wireless network communication
technology. It aims at improving the interoperability between wireless network
products based on IEEE802.11 standard.
The advantages of Wi-Fi: Wi-Fi does not need cables for connection, while it
connects and delivers signals by wireless electronic waves. It can be moved freely
without the limitation of lines; it can be installed conveniently and easy to expand.
(1) WIFI infrastructure: wireless device in network (computer, printer etc.) deal
with all the data transmission and network flow via route or AP.
(2) There are some advantages for using RPP300 under wireless infrastructure:
high reliability of network signal, better performance of network security,
flexible network extension.
(3) Setup for RPP300 Previous preparation: connect printer to PC via USB port
and install USB virtual.
1. Open “Wifitool” attached to the disk
2. Input the name of route in SSID, for example, printer.
3. Choose the encryption type of wireless route based on the route you are
using now. If you choose the encryption type as “WPA-PSK/WPA2-PSK”,
authentication type as “automate”, then you can choose WPA2-PSK or
WPA2-PSK in Wifitool. The setting data of wifitool should keep the same
to route.