Xpand X103-CP User Manual - page 10
© XPAND, All Rights Reserved.
10 www.xpand.me
Anti-Theft System
Anti-theft system for XPAND Pi Cinema 3D Glasses is an optional accessory and is not
part of a standard XPAND Pi Cinema 3D Glasses package.
Anti-theft system in XPAND Pi Cinema 3D Glasses is implemented in a form of a
special earpiece which has an anti-theft tag installed in it. These earpieces can be
ordered and installed on the glasses by following below steps:
Unscrew the screw holding the earpiece in place and remove it – see the
Replacing
the Earpiece section of this manual.
Step 1: Insert the anti-theft earpiece into the glasses and tighten the screw.
Step 2: The anti-theft tag inside the anti-theft earpiece can also be replaced by
removing the old one from the plastic compartment on the back of the earpiece and
inserting a new one - images a and b.
Storage
It is recommended that the glasses be stored away from any IR source such as
fl uorescent lighting. It is suffi cient to cover the glasses so that any IR signal does
not accidentally trigger the glasses on. Storage temperature should be standard
room temperature as higher temperatures reduce battery life. In cinema, the optimal
storage solution is the XPAND Trolley – these trolleys were designed to provide
the cinemas with optimal solution for storage, handling, distribution, service and
collection of XPAND Cinema 3D Glasses.