Xpand X103-CP User Manual - page 9

© XPAND, All Rights Reserved. 

9 

www.xpand.me

Rep lacing the Earpiece

If broken or damaged, earpieces can be replaced with new ones by following below 

two steps:

Step 1: Unscrew the screw holding the earpiece in place and remove the earpiece.

Step 2: Insert the new earpiece into the glasses, insert the screw back in and tighten 

it.

Accessories

Each pair of XPAND Pi Cinema 3D Glasses comes with three nosepieces. The 

medium one is already attached to the glasses and one small and one large one are 

included in the package. One battery is already installed in the glasses with a pull-tag 

preventing it from discharging. 

Nosepiece: The rubber nosepiece can be easily removed and replaced. Three sizes 

exist: large, medium and small.

Battery: Glasses use a standard CR2032 button cell Lithium battery.

Battery Cover: If lost or broken a new battery cover can be used to hold the battery 

in place.

Regular Earpiece: If broken or damaged earpieces can be replaced with new ones.