Xpand X103-CP User Manual - Troubleshooting
© XPAND, All Rights Reserved.
11 www.xpand.me
Handling
The durable and robust frame is designed to protect the electronics and the lenses.
However
the lenses are susceptible to cracking if the glasses are twisted. Do
not twist or bend the glasses! Broken lenses are not covered by warranty. Glasses
should be held by the frame in order to avoid getting fingerprints on the lenses or
scratching them. The user must be aware of these limitations and avoid any twisting,
bending, rotation or manual adjustment!
Cleaning
XPAND carefully designed cleaning and sanitizing wipes that maximize the life-
time of the glasses. Usage of wipes minimizes handling costs (as the glasses are
cleaned by the user) and maximizes durability (as the glasses are not exposed to
high temperatures).
Using paper towels should be avoided as they can scratch
the lens!
Warning! XPAND Pi Cinema 3D Glasses are not designed to be washed in a
dishwasher.
Troubleshooting
Glasses do not work: Make sure the emitter is correctly positioned to ensure
sufficient signal strength, connected to a projector and that the projector is in 3D
mode. If glasses still do not work, the reason might be an empty battery, excessive IR
noise in the area in which the glasses are used or cracked lenses.
Glasses are losing sync while watching 3D content: Make sure there is no IR
noise present. Start by turning off all lighting in the room. Also make sure the IR
signal is strong enough.
FCC Regulatory Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.