Xplore iX104C3 User Handbook Manual - page 32

Chapter 2. Using the iX104C3

Using the pen

32

iX104C

3

 User’s Handbook

Using the pen

You can use the pen to select items and to navigate through programs.

If your computer is an iX104C

3

 Tablet PC: 

Use the special multi-function pen provided with the 

computer.

If your computer is an iX104C

3

 Dual Mode:

You can use any of the following input methods:

Auto-Sense mode: Use either the multi-function pen or your 

finger interchangeably. The computer distinguishes between 

the two input modes and automatically adjusts accordingly. 

This is the tablet’s default state.

Active mode: Use only the special multi-function pen 

provided with the computer. 

Touch mode: Use your finger or another similar pointing 

device.

For more information, see “Selecting Auto-Sense, Active, or 

Touch mode” on page 33.

WARNING

Do not use items such as a ball point pen or a screwdriver that can 

damage the tablet. Damage caused by using an item not provided with 

the tablet is not covered by the tablet warranty.

Note: Before you use the tablet the first time, or if the action 

you are trying to perform does not occur when you use the pen 

or your finger to touch the screen, calibrate the digitizer as 

described in “Calibrating the digitizer” on page 71.

For more information about 

Dual Mode tablet input 

methods, see Appendix F,  

"Configuring Dual Mode 

Tablet Digitizer Input 

Methods.”