Xplore iX104C3 User Handbook Manual - page 97
Manual is about: Tablet PC
of
110
Appendix F. Configuring Dual Mode Tablet Digitizer Input Methods
Using the Panel Control Center to configure controls for temporary changes to the input method
iX104C
3
User’s Handbook
97
4.
From the drop-down list, select
Digitizer Selection
or
Touch Panel
Toggle
.
Value
Description
Digitizer Selection
If the digitizer input method is set to Auto in the
BIOS Setup Utility, toggles from Auto to Digitizer
Only to Touch Only.
Touch Panel Toggle If the digitizer input method is set to Auto or Touch
Only in the BIOS Setup Utility, temporarily disables
touch only.