Xplore iX104C3 User Handbook Manual - page 54

Chapter 2. Using the iX104C3

Accessing the PCMCIA compartment

54

iX104C

3

 User’s Handbook

Accessing the PCMCIA compartment

When you install a PCMCIA card, follow the  instructions in this 

section to access the PCMCIA compartment.

WARNING

Failure to follow this procedure can result in 

damage to the case and the cover, which is not 

covered under the Xplore Technologies warranty.

1.

Turn off the computer.

2.

Remove all power from the unit, including batteries and other 

power sources such as power supplies, cigarette lighter adapters, 

and mobile power sources.

3.

Remove the battery. (See “Removing and installing the battery” 

on page 45.)

4.

Use an M1 Philips screwdriver to remove the 6 screws from the 

compartment cover. (Do not use a power screwdriver.)

6 screws