Xplore iX104C3 User Handbook Manual - page 78

Appendix B. Using BIOS and AOS Functions

Disabling the Auto Power feature

78

iX104C

3

 User’s Handbook

Disabling the Auto Power feature

When Auto Power is enabled, the tablet automatically turns on if you 

dock it and the following conditions exist:

■

The tablet is off or in Hibernation or Standby mode.

■

The dock or the tablet is connected to an external power source 

(including power applied when a vehicle’s ignition is started).

If you dock the tablet and the tablet is off and no power is present, the 

tablet turns on as soon as power is applied.

To disable the Auto Power feature:

1.

When the computer is booting, press the P2 button to access the 

BIOS Setup Utility.

2.

Select the Advanced tab.

3.

Disable the 

Dock with Auto Power On

 option.

Enabling automatic LCD backlight control

When the LCD backlight control is in manual mode, the ambient light 

sensor is disabled and the computer does not automatically control the 

screen brightness.

Follow these steps to enable automatic LCD backlight control:

1.

When the computer is booting, press the 

P2

 button to start the 

BIOS Setup Utility.

2.

Select the Main tab.

3.

In the

 LCD Backlight Control

 drop-down list, select 

Automatic

.

4.

Click 

OK

.

Note:  When the tablet is in 

the docking station, it will shut 

down or go into Hibernation 

or Standby mode the same as 

it does when not in the 

docking station.