Vehicle application guide...................................................................................................................................................................... Key2go.........................................................................................................
Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. Vehicle application guide page 2 the table below lists the vehicles and features which are compatible with this product. Refer to the following pages for more informa...
Important! The hood pin and remote start safety override switch are mandatory safety devices, but are not supplied with the dball. Mini-relay is recommended, but is not supplied. Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All righ...
Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. Page 4 type 1 installation with t-harness thchd3 the remote start safety override switch must be in the off position. Remote start safety override switch 10 dball/ db...
Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. Type 1 - vehicle wiring reference charts page 5 wire colors should only be used as a reference. You should always test a wire's function and pin location before conne...
Important! The hood pin and remote start safety override switch are mandatory safety devices, but are not supplied with the dball. Mini-relay is recommended, but is not supplied. Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All righ...
Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. Page 7 type 2 installation with t-harness thchd3 the remote start safety override switch must be in the off position. Remote start safety override switch 10 dball/ db...
Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. Type 2 - vehicle wiring reference charts page 8 wire colors should only be used as a reference. You should always test a wire's function and pin location before conne...
Smartstart/xl202 installation notes page 9 rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. The optional xl202 and antenna are not included and must be purchased separately. Refer to the passive keyless entry (pke) ...
Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. 2 remove the battery from the factory keyless remote page 10 module programming 1 10-pin d2d st 1 connect the 10-pin, 12-pin and 14-pin harnesses to dball, then wait ...
Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. You have successfully completed the module programming sequence. 9 8 click on submit key2go request. Remove the dball from the vehicle and reconnect it to your comput...
Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. Page 12 1 if required for your installation, connect the 10-pin & 12-pin harnesses to the module. Press and hold the programming button, then connect the 14-pin harne...
Page 13 feature & option list rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. It is recommended to configure all the features and options listed below using the configuration tool found on the module flashing page ...
Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. To enter feature programming routine - turn the ignition on, then off. - within 5 seconds, press and hold the programming button until the led turns on orange (after ...
Page 15 led diagnostics & troubleshooting rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. Led description troubleshooting module has no power. Check the power connections. Start of programming is normal if the led ...
Page 16 rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. Flashes diagnostic 1 runtime expired. 2 over-rev shutdown. 3 low/no rpm. 4 transmitter shutdown. 5 brake shutdown. 6 hood shutdown/remote start safety overrid...
Rev.: 20160608 platform: dball/dball2 firmware: chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. Limited one year consumer warranty page 17 for a period of one year from the date of purchase of a directed electronics remote start or security product, directed ele...
Quick reference guide dball/dball2-chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. 1 2 3 stop the vehicle in a safe parking spot and put the gear in park (p). Press remote start button* * your aftermarket remote may differ from the model shown in the illustratio...
Quick reference guide dball/dball2-chrysler3 remote start ready (rsr) installation © 2016 directed. All rights reserved. Button(s) actions press & hold for 1 second to lock. Press & hold for 1 second to unlock. Press & hold for 1 second to remote start. Press & hold for 5 seconds to activate the tru...