Yale EIS1100 User Manual - Specification

Specification

2. Using the Viewer: When the door bell is pressed 

the LCD screen will automatically operate (the length 

of time this stays on can be changed in the menu).

To view without the bell being pressed, press the 

power button for 2 seconds. Press the power button 

again (while screen is on) and you will zoom in, press 

the left or right arrow buttons to zoom to the left or 

right. Press the power button again and to zoom 

back out. 

3. Taking Pictures: Only possible if a ‘SD card’ is 

fitted (not supplied).

If required, each time the door bell is pressed a 

picture will be taken (see the setup menu).

To take a picture without the door bell being 

pressed, press the power button (if not on) then 

press the left arrow button. 

4. Playback (View) Pictures: To view the pictures, 

press the power button (if not on) then press the 

right arrow button. Use the left and right arrow but-

tons to scroll through the pictures taken. You can 

zoom into the photo by pressing power button and 

then left/right to navigate.

Note: If untouched the door viewer will shut down in 

10, 20 or 30 seconds depending on setting.

Using the viewer

Doorbell

Pressing

9