Yale EIS1100 User Manual - Before Installation

Before Installation

1. Charging the battery: The battery will 

need to be fully charged before inserting 

into the LCD viewer, this will take 1 

1

⁄

2

 - 2 

hours. 

Plug the power adapter into the mains 

power socket and insert the ‘pin’ plug into 

the battery charger. Fit the battery into the 

charger with label facing up. 

The light will glow red when charging and 

green when fully charged.

Note: the red light will blink if the battery is 

not correctly inserted.

Battery Life: The battery will last about 

400 to 500 snaps (photos) per charge 

and can be recharged at least 200 times. 

The battery have 6 months maximum 

standby time.

2. Carefully insert the connecting cable 

squarely into the back of the camera, blue 

side up and in as far as the black line.

Important: The connecting cable is 

fragile and should be handled with 

care. Image will be distorted if cable not 

connected properly.

3. Carefully insert the connecting cable 

squarely into the back of the LCD viewer, 

blue side up and in as far as the black 

line.

Adapter

Battery Charger

(Red)

(Green)

Charging

Complete

3