Yale EIS1100 User Manual - Installation Instructions

8. Hook the LCD viewer onto the 

connecting plate (ensure the connecting 

cable is not twisted), slide the viewer down 

and fix in position from below using the 

5mm (3/16”) screw.

9. If required insert an ‘SD card’ (not 

supplied) into the slot above the battery 

cover. To remove the ‘SD card’, push in, 

release and then pull out.

SD cards are available from most electronic 

and digital imaging retailers. 

The fitting of your new Yale door viewer is 

now complete.  

Installation instructions 

(continued)

7