Yale EIS1100 User Manual - Setting Up The Door Viewer

Setting up the door viewer

1. All data will need to be set when the battery is 

first fitted or when it is removed and re-fitted.

Press the left arrow button and hold down, then 

press the power button and hold down both for 

5 seconds, the MENU SETUP will appear.  

Use the arrow buttons to scroll through the 

subjects/settings, they will appear white as you 

scroll, to select the subject press the power 

button. When the selected items are white the 

information can be changed using the left (up) 

and right (down) buttons, use the power button 

to move onto the next subject/setting.

Note: Sleep time refers to the length of time the 

door viewer stays on once the power button is 

pressed.

Set all of the subjects as required.

Note: If you do not ‘exit’ the menu the display 

will stay on until either the battery is drained or 

the door bell is pressed.

8