Yale Real Living Installation And Programming Instructions - page 8
8
An ASSA ABLOY Group brand
P/N AYRD220-INST-FUL Rev C
8. Install and secure using (3) M4 x 8mm [8-32 x 5/16"]
pan head screws through the inside escutcheon into
the mounting plate (Fig. 8).
IMPORTANT: Before installing the batteries, test
the mechanical operation of the lock by operating
the thumbturn. The movement of the bolt should be
smooth and unobstructed.
If operation is not smooth, review the previous
steps to ensure proper installation.
9. Insert four (4) AA alkaline batteries. The lock will flash,
beep several times and respond with the vocal prompt:
"Welcome to Yale Real Living".
When activating the lock for the first time, the lock will
adjust for proper handing.
Note: Refer to programming instructions in following section prior
to completion of next step (10).
10. Install battery cover and tighten Phillips head screw.
NOTE: The bolt must be in a retracted (unlocked) position
prior to installing the batteries.
Figure 8
Figure 9
7. Install inside escutcheon on inside mounting plate.
Figure 7
Note the horizontal orientation of the tailpiece (Fig. 7)
as you insert the inside escutcheon;
the thumbturn
should be vertical.
(3) Pan head
screws