Yamaha DVD-S550 Owner's Manual - Setup Menu
18
Setup Menu
LT/RT
Select this if your DVD player is connected
to a Dolby Prologic decoder.
VIRTUAL SURROUND
Select this to reproduce the surround
channels virtually.
2
Press
34
to select a setting, then press
ENTER/OK
to confirm your selection.
The options included in Digital Audio are:
‘Digital Output’ and ‘LPCM Output’.
1
In ‘AUDIO SETUP PAGE’, press
34
to
highlight {DIGITAL AUDIO}, then press
2
.
1
Press the
34
to highlight an option.
2
Enter its submenu by pressing
2
.
3
Move the cursor by pressing the
34
to
highlight the selected item.
Digital Output
Set the Digital output according to your
optional audio equipment connection.
➜
Off
: Turn off the digital output.
➜
All
: If you have connected your
DIGITAL AUDIO OUT to a multi-
channel decoder/receiver.
➜
PCM Only
:Only if your receiver is not
capable of decoding multi-
channel audio.
Helpful Hint:
– If DIGITAL OUTPUT is set to ‘All’, all audio
settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver via the digital
terminals, such as coaxial or optical etc,
you may need to adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate. The higher the sampling rate, the
better the sound quality.
➜
48kHz
: Playback a disc recorded at
the sampling rate of 48kHz.
➜
96kHz
: Playback a disc recorded at
the sampling rate of 96kHz.
Helpful Hint:
– LPCM Output can be selected only when
PCM Only is activated.
This feature allows you to convert your
music CD to a higher sampling rate using
sophisticated digital signal processing for
better sound quality. If you have activated
the upsampling, the player will
automatically switch to stereo mode.
1
In ‘AUDIO SETUP PAGE’, press
34
to
highlight {CD UPSAMPLING}, then press
2
.
OFF
Select this to disable CD-upsampling.
88.2 kHz (X2)
Select this to convert the sampling rate of
the CDs twice higher than the original.
176.4 kHz (X4)
Select this to convert the sampling rate of
the CDs four times higher than the
original.
2
Press
34
to select a setting, then press
ENTER/OK
to confirm your selection.
Digital Audio
TIPS:
To return to the previous menu, press
1
.
To remove the menu, press
ON SCREEN
.
CD Upsampling
S550̲G02̲eng Page 18 Monday, March 1, 2004 10:05 AM