Yamaha DVD-S550 Owner's Manual - Setup Menu
20
Setup Menu
This feature is only applicable if you have
connected this DVD Player to a
Progressive Scan TV through the Y Pb Pr
jacks (see page @@).
1
In ‘VIDEO SETUP PAGE’, press
34
to
highlight {PROGRESSIVE}, then press
2
.
OFF
To disable Progressive Scan function.
ON
To enable Progressive Scan function.
2
Press
34
to select a setting, then press
ENTER/OK
to confirm your selection.
Notes on activating Progressive:
– Ensure that your TV has progressive
scan.
– Connect with YPbPr video cable.
– When the Progressive is active, the
VIDEO (CVBS) and S VIDEO jacks do
not output video signals.
– If there is no picture, wait 15 seconds
for auto recover or deactivate
Progressive manually.
1
Open the disc tray by pressing
/
(OPEN/
CLOSE)on the front panel.
2
Press
1
.
3
Press MUTE.
– You cannot activate Progressive when
“COMPONENT” is set to “RGB”.
This DVD Player provides three
predefined sets of picture colour settings
and one personal setting which you can
define yourself.
1
In ‘VIDEO SETUP PAGE’, press
34
to
highlight {PICTURE SETTING}, then press
2
.
STANDARD
Select this for standard picture setting.
BRIGHT
Select this will make the TV picture
brighter.
SOFT
Select this will make the TV picture softer.
PERSONAL
Select this to personalise your picture
colour by adjusting the brightness,
contrast, tint and colour (saturation).
2
Press
34
to select a setting, then press
ENTER/OK
to confirm your selection.
Progressive
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE
FULLY COMPATIBLE WITH THIS PRODUCT
AND MAY CAUSE ARTIFACTS TO BE
DISPLAYED IN THE PICTURE. IN CASE OF 525
OR 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE
“STANDARD DEFINITION” OUTPUT. IF THERE
ARE QUESTIONS REGARDING OUR VIDEO
MONITOR COMPATIBILITY WITH THIS
MODEL 525P AND 625P DVD PLAYER, PLEASE
CONTACT OUR CUSTOMER SERVICE
CENTER.
This unit is compatible with the complete line of
YAMAHA products, including the projectors DPX-
1000, LPX-510 and the plasma monitor PDM-
4210E.
Picture Setting
TIPS:
To return to the previous menu, press
1
.
To remove the menu, press
ON SCREEN
.
S550̲G02̲eng Page 20 Monday, March 1, 2004 10:05 AM