Yamaha MCX-C15 - MusicCAST Network Audio Player Install Manual - Stopping Broadcast
Broadcast
MusicCAST Version Upgrade 1
9
Stopping Broadcast
1
Press BROADCAST on the MusicCAST server remote control. When
the message “Stop Broadcast?” appears on the display, use
j
to
select “OK”.
2
Press SELECT.
Broadcast stops.
Changing target MusicCAST client settings
1
Press TOP MENU. When the Top Menu screen appears on the
display, use
u
/
d
to select “System Setup”.
2
Press SELECT. When the System Setup screen appears on the
display, use
u
/
d
to select “Client”.
You can also stop Broadcast by
selecting “Broadcast” from the
Sub Menu of the Play Information
screen, then carrying out step 1
and 2 of procedure at left.
Press BACK, or move the cursor
to “Cancel” and press SELECT, to
return to the previous screen.
The MusicCAST server
automatically displays a check in
the checkboxes of pre-set
MusicCAST clients whenever the
Broadcast client selection screen
in step 1 on page 8 is displayed.
Stopping Broadcast from
the Play Information
screen
Exiting from the
cancellation screen
Setting target MusicCAST
clients