Yamaha MMP1 Setup Manual - page 13
13
5. 8-channel mic preamp (Yamaha MLA8)
http://www.yamahaproaudio.com/global/en/products/interfaces/mla8/
Since MMP1 does not have built-in mic preamp, you will need to have a mic preamp when
handling microphone signals (including talkback mic). This example uses Yamaha MLA8, an
8-channel mic preamp).
[Yamaha MLA8]
6. Yamaha SWP1 (network switch)
http://www.yamahaproaudio.com/global/en/products/interfaces/swp1/index.jsp
This example requires at least one level-two (L2) switch for Dante audio network, and we
will use Yamaha SWP1 optimized for Dante.
[Yamaha SWP1]
7.
Cough box
One cough box mutes only during pressing the COUGH button, another has volume fader or
slider, the others have built-in microphone for Return Talkback (RTB). Connect the cough box to
MMP1 via GPI connectors and configure MMP1 so the following control can be done remotely.
- Turn Cough Mute on/off
- Turn RTB (Return Talk Back) on/off
- Display Cough mute on/off status