Yamaha MMP1 Setup Manual - page 89
Other manuals for MMP1:
Operation Manual
of
91
89
Wired connection with iPad
In order to connect iPad via LAN cable, you will need to use the two adapters described
earlier and configure iPad connected to the switch. Make sure “Apple USB Ethernet
Adapter” is shown, tap on that and you will see the IP address and other setting in the next
page (in this example, we are using Auto IP addressing so make sure each IP address is set
at 169.254.xxx.yyy with the subnet mask of 255.255.0.0).
[Settings - Ethernet]
[Settings – Ethernet – Apple USB Ethernet Adapter]