Yamaha Portatone PSR-5700 Advanced Features - page 28

28

[F1] Custom Voice Edit

+

–

+

–

£MODULATION ……Piano 1

Depth= 0

Speed= 0

+

–

+

–

†“COMMON

……Piano 1

Oct=Normal

Pan=L

R

+

–

+

–

“COMMON

……Piano 1 ‡

PitBend=2

TouchSens=2

2

 COMMON

COMMON includes two display screens covering a range of parameters that affect the entire voice.

Use the [

] and [

>

] buttons to switch between the two display screens, and the [-] and [+] buttons

below each parameter to set the required values.

DETAIL

DETAIL

3

 MODULATION

The two parameters provided in this screen are used to adjust the depth and speed of

modulation produced by the PSR-5700 MODULATION/EFFECT wheel.

Use the [-] and [+] buttons below each parameter to set the required values.

●

 Octave (Oct)

Shifts the pitch of the voice up one octave (1up) or

down one octave (1down). A setting of “normal” produces

the normal pitch for that voice.

Some voices may exhibit sudden pitch changes in the highest

and lowest ranges of the keyboard when shifted up or down by

an octave. The pitch bend wheel may also cause sudden pitch

changes.

●

 Pan

Sets the apparent position of the voice in the stereo

sound field. The graphic display indicates the approximate

location of the sound between the left and right speakers.

When Pan is set to the center position, the preset pan position

of the selected voice is used. The center pan position can be

recalled immediately by pressing both the [-] and [+] buttons

simultaneously.

●

 Pitch Bend Range (PitBend)

Sets the range of the pitch bend wheel to “0” (OFF), “1”

(

±

1 semitone), “2” (

±

2 semitones), “3” (

±

3 semitones), or

“Glis” (maximum 1-octave glissando in semitone steps).

●

 Touch Sensitivity (TouchSens)

Allows the touch sensitivity of the keyboard to be set to

three different levels, or turned off: “0” (OFF), “1”, “2” ,

or “3”.

●

 Modulation Depth

Decreases (-) or increases (+) the depth of modulation

produced by the PSR-5700 MODULATION/EFFECT

wheel relative to the original modulation depth of the

selected voice.

●

 Modulation Speed

Decreases (-) or increases (+) the speed of modulation

produced by the MODULATION/EFFECT wheel relative

to the original modulation speed of the selected voice.

Notes:

The maximum range of the depth and speed is from -7

through 0 to +7, although this range is more limited with

some voices. An exclamation mark (!) will appear next to the

parameter when the maximum or minimum allowable setting

for the selected voice has been reached.

The default modulation depth and speed values for the

selected voice are produced by settings of “0”. Minus set-

tings produce gentler or slower modulation, while plus set-

tings produce deeper or faster modulation, respectively.

Pressing both the [-] and [+] buttons below a parameter im-

mediately recalls the default value (“0”).

Modulation is applied automatically to some voices, and

in some cases operating the wheel causes modulation to be

applied automatically.