Yamaha Portatone PSR-5700 Advanced Features - page 39
39
5
PITCH BEND SELECT
+
–
+
–
PITCH BEND SELECT
Orch1=ON
Orch2=ON
6
WHEEL SELECT
+
–
+
–
†⁄WHEEL SELECT
Orch1=ON
Orch2=OFF
+
–
⁄WHEEL SELECT
‡
Type=Modulation
Procedure:
Use the left [-] and [+] buttons to turn pitch wheel control
on or off for the orchestra 1 voice, and the right [-] and [+]
buttons to turn pitch wheel on or off for the orchestra 2
voice.
Notes:
If, for example, you’re using the split mode (ORCH.
2
v
1) with a bass voice on the left and a sax voice on the
right, you’ll want pitch bend to apply only to the right-hand
sax voice. In this case simply turn orchestra 1 pitch bend on
and orchestra 2 pitch bend off.
If AUTO BASS CHORD is on and the ORCH. 2
v
1 or-
chestration mode is selected, no pitch bend is applied to the
ORCH. 2 voice.
Purpose:
Determines whether the PITCH BEND/GLISSANDO
wheel will affect the orchestra 1 voice, the orchestra 2 voice,
or both orchestra voices.
Procedure:
Use the left [-] and [+] buttons to select either “Modula-
tion” or “Effect” operation, then press the [
>
] button to
move to the second display screen and use the left [-] and [+]
buttons to turn wheel control on or off for the orchestra 1
voice, and the right [-] and [+] buttons to turn wheel control
on or off for the orchestra 2 voice.
Notes:
This function can be used to apply modulation or the se-
lected effect to just one of the voices being played in the split
mode (ORCH. 2
v
1) to emphasize that voice and provide
greater contrast with the other voice.
When “Effect” operation is selected, the wheel will func-
tion only when the panel [EFFECT] button is turned on.
If AUTO BASS CHORD is on and the ORCH. 2
v
1 or-
chestration mode is selected, no modulation is applied to the
ORCH. 2 voice.
Purpose:
Determines whether the MODULATION/EFFECT wheel
will control modulation or the selected effect (page 36), and
whether it will affect the orchestra 1 voice, the orchestra 2
voice, or both orchestra voices.
[F3] Controller & Key Velocity