Yamaha Portatone PSR-5700 Advanced Features - page 32

32

[F1] Custom Voice Edit

+

–

+

–

DUAL PAN

»…SpacePno

A=L

R

B=L

R

5

 DUAL PAN

Purpose:

Independently sets the pan positions of the two voices

used in the dual voice.

Procedure:

Use the left and right [-] and [+] buttons to set the desired

pan positions for voices A and B. The graphic display indi-

cates the approximate location of the sound between the left

and right speakers.

Notes:

When Pan is set to the center position, the preset pan posi-

tion of the selected voice is used. The center pan position can

be instantly recalled by pressing both the [-] and [+] buttons

simultaneously.

+

–

+

–

⁄DUAL DETUNE »…SpacePno

A=

0

B=+ 2

6

 DUAL DETUNE

Purpose:

Allows the two voices used in the dual voice to be detuned

slightly to create a thicker sound.

Procedure:

Use the left and right [-] and [+] buttons to set the desired

detune for voices A and B.

Notes:

The normal tune value is “0”. This can be tuned down to a

maximum setting of -50 or up to a maximum setting of +50.

Each increment equals approximately 0.78 cents (a cent is

one hundredth of a semitone). The maximum amount of

detune that can be set in either direction is therefore 39 cents

— not quite a quarter tone.

This function can be used by leaving one of the voices set

at “0” and detuning the other until the desired effect is

achieved. Another approach is to tune one voice down and

the other up.

The pitch bend range is always 

±

200 cents, regardless of

the setting of this function.

When the parameter is set to “-50” or “50” an exclamation

mark (!) will appear next to the parameter indicating that the

limit has been reached.