Yamaha Raptor YFM7RSEZ Owner's Manual - page 33
4-15
4
TIP
●
A special wrench can be obtained at a Yamaha
dealer to make this adjustment.
●
The spring preload setting is determined by
measuring distance A, shown in the illustration.
The shorter distance A is, the higher the spring
preload; the longer distance A is, the lower the
spring preload. With each complete turn of the
adjusting nut, distance A is changed by 1.5 mm
(0.06 in).
3. Tighten the locknut to the specified torque.
NOTICE: Always tighten the locknut
against the adjusting nut, and then tighten
it to the specified torque.
[ECB00081]
1. Spring preload adjusting nut
2. Locknut
3. Special wrench
2
1
3
(a)
(b)
Spring preload setting:
Minimum (soft):
Distance A = 263.0 mm (10.35 in)
Standard:
Distance A = 260.0 mm (10.24 in)
Maximum (hard):
Distance A = 251.0 mm (9.88 in)
1. Distance A
1
U1AS10E0.book Page 15 Tuesday, February 10, 2009 9:33 AM