Yamaha Raptor YFM7RSEZ Owner's Manual - page 40
4-22
4
TIP
Make sure that the position indicator marks are
aligned when the shock absorber assembly is set
to the standard setting.
Compression damping force (for slow compres-
sion damping)
To increase the compression damping force and
thereby harden the compression damping, turn the
compression damping force adjusting screw in di-
rection (a). To decrease the compression damping
force and thereby soften the compression damp-
ing, turn the adjusting screw in direction (b).
1. Compression damping force adjusting bolt (for fast
compression damping)
2. Position indicator marks
Compression damping setting (for fast com-
pression damping):
Minimum (soft):
Adjusting bolt 4 turn(s) out from the fully
turned in position
Standard:
Adjusting bolt 2 turn(s) out from the fully
turned in position
Maximum (hard):
Adjusting bolt fully turned in
1
(b)
(a)
1
2
1. Compression damping force adjusting screw (for slow
compression damping)
1
(b)
(a)
U1AS10E0.book Page 22 Tuesday, February 10, 2009 9:33 AM