Yamaha Raptor YFM7RSEZ Owner's Manual - page 98
of
154
8-19
8
4. Remove the radiator cap.
5. Remove the coolant reservoir cap.
6. Disconnect the hose on the coolant reservoir
side, and then drain the coolant from the cool-
ant reservoir.
7. After draining the coolant, thoroughly flush the
cooling system with clean tap water.
8. Replace the coolant drain bolt washer if it is
damaged, and then tighten the coolant drain
bolt to the specified torque.
1. Coolant drain bolt
1. Radiator cap
1
1
1. Coolant reservoir cap
2. Hose
Tightening torque:
Coolant drain bolt:
11 Nm (1.1 m·kgf, 8.0 ft·lbf)
1
2
U1AS10E0.book Page 19 Tuesday, February 10, 2009 9:33 AM