Yamaha Raptor YFM7RSEZ Owner's Manual - page 94
of
154
8-15
8
8. Check the O-rings for damage, and replace
them if necessary.
9. Install a new oil filter element and the O-rings.
TIP
Make sure that the O-rings are properly seated.
10. Install the oil filter element cover by installing
the bolts, and then tighten them to the speci-
fied torque.
1. Oil filter element cover
2. Bolt
2
1
1. Oil filter element
2. O-ring
Tightening torque:
Oil filter element cover bolt:
10 Nm (1.0 m·kgf, 7.2 ft·lbf)
1
2
2
U1AS10E0.book Page 15 Tuesday, February 10, 2009 9:33 AM