Yamaha SP2060 Service Manual - page 10
SP2060
10
■ DISASSEMBLY PROCEDURES (分解手順)
1.
Rack Angle (Time required: About 1 min.)
1-1.
Remove the three (3) screws marked [1050]. The rack
angle L can then be removed. (Fig. 1)
1-2.
Remove the three (3) screws marked [1020]. The rack
angle R can then be removed. (Fig. 1)
2.
Top Cover (Time required : About 2 min.)
2-1.
Remove the rack angle L and R. (See procedure 1)
2-2.
Remove the five (5) screws marked [990] and four (4)
screws marked [980]. The top cover can then be re-
moved.
1.
ラックアングル
(所要時間:約1分)
1-1.
[1050]のネジ3本を外し、ラックアングルLを外しま
す。
(図1)
1-2.
[1020]のネジ3本を外し、ラックアングルRを外しま
す。
(図1)
2.
トップカバー
(所要時間:約2分)
2-1.
ラックアングルL、Rを外します。
(1項参照)
2-2.
[990]のネジ5本、[980]のネジ4本を外し、トップカ
バーを外します。
(図1)
[980]:
Special Flat Head Screw-S 3x6 MFZN2B3 (WF054700)
Sタイト
[990]:
Bind Head Tapping Screw-S 3x6 MFZN2B3 (WE877800)
Sタイト+BIND
[1020]:
Bind Head Tapping Screw-B 4x8 MFZN2B3 (WE986200)
Bタイト+BIND
[1050]:
Bind Head Tapping Screw-B 4x8 MFZN2B3 (WE986200)
Bタイト+BIND
[990]
[990]
[1050]
[980]
[990]
[1020]
Top cover
(トップカバー)
Rack angle L
(ラックアングルL)
Rack angle R
(ラックアングルR)
(Fig. 1)
(図1)