Yamaha SP2060 Service Manual - Initializing
SP2060
68
■
INITIALIZING
INITIALIZE
CURRENT
BACKUP
Follow the steps below to initialize the internal memory:
You can select one of the following initialization types:
3. Press the [INC]/[DEC] keys to select a type of initialization.
Note
To cancel the initialization operation, select “Exit” and confirm the cancellation.
Alternatively, simply turn off the power to the SP2060.
4. Press the [NEXT] key to move the cursor to the icon, then press the [INC/YES] key.
The following message appears.
5. Press the [INC/YES] key to start initialization operation.
During initialization, the following message appears.
INITIALIZE
ARE
YOU
SURE?
When you press the [DEC/NO], initialization is canceled.
6. When initialization is completed, the SP2060 displays the following message, then automatically restarts.
Executing..
Completed!
Caution
The data of the scene number and current scene are backed up by the battery. [SRAM (CPU circuit board: IC009)]
When the internal memory is initialized, the data stored in the memory will be lost.
Before initializing, save the data to an external device (such as a computer) with the backup function of the DME Designer.
For more information on the operation, refer to the DME Designer owner’s manual.
Use caution when you execute this function.
1. Turn off the power to the SP2060.
2. Turn on the power to the SP2060 while pressing the [BACK/STORE] key.
Keep pressing the [BACK/STORE] key until the initialization display appears.
LCD display
CURRENT BACKUP
WITHOUT LIB.
FACTORY SETUP
Purpose
To initialize the backup current scene.
Return the user settings except library to the factory set
up.
Return the setting to the factory set up.
Library
Do nothing
Do nothing
Initialize
Scene
Configuration
Component
Utility
Current Scene Number
Do nothing
Initialize
Initialize
Current scene
Erase
Erase
Erase
[BACK/STORE] [ INC/YES]
[POWER]
[DEC/NO] [NEXT/RECALL]