Yamaha TX4n Owner's Manual

Manual is about: Yamaha Power Amplifier Reference Manual

Summary of TX4n

  • Page 1

    It ru es fr de en.

  • Page 2

    Tx6n/5n/4n owner’s manual 2 the above warning is located on the top of the unit. Explanation of graphical symbols the lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure t...

  • Page 3: Fcc Information (U.S.A.)

    Tx6n/5n/4n owner’s manual 3 * this applies only to products distributed by yamaha corporation of america. Compliance information statement (declaration of conformity procedure) responsible party : yamaha corporation of america address : 6600 orangethorpe ave., buena park, calif. 90620 telephone : 71...

  • Page 4: Precautions

    Tx6n/5n/4n owner’s manual 4 precautions please read carefully before proceeding * please keep this manual in a safe place for future reference. Warning always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, d...

  • Page 5

    Tx6n/5n/4n owner’s manual 5 • condensation can occur in the device due to rapid, drastic changes in ambient temperature – when the device is moved from one location to another, or air conditioning is turned on or off, for example. Using the device while condensation is present can cause damage. If t...

  • Page 6: Contents

    Tx6n/5n/4n owner’s manual 6 introduction ........................................................................................................7 features................................................................................................................................... 7 about setup...

  • Page 7: Introduction

    Tx6n/5n/4n owner’s manual 7 introduction thank you for purchasing the yamaha tx6n, tx5n, tx4n power amplifier. In order to take full advantage of the tx6n/tx5n/tx4n’s (txn) functionality and to ensure trouble-free operation, please read this owner’s manual carefully before use. After you have read t...

  • Page 8: Firmware Updates

    Tx6n/5n/4n owner’s manual 8 firmware updates the firmware version of the txn itself can be checked from the txn’s panel and from amp editor. You can update the firmware via amp editor. For the update procedure, refer to the amp editor owner’s manual. You can download the latest firmware from the “do...

  • Page 9: Basic Operation of The Txn

    Tx6n/5n/4n owner’s manual 9 basic operation of the txn by pressing a function button you can move to the screen indicated above that button. By pressing the [home] button you can move to the home screen. By pressing the [exit] button you can move to the screen one level above. Use encoders a and b t...

  • Page 10

    Basic operation of the txn tx6n/5n/4n owner’s manual 10 • for details, refer to the tx6n/5n/4n reference manual. *scene..........The settings listed above, such as power standby/on or mute (with the exception of utility), are called a “scene”. By recalling a scene, the saved settings can be immediat...

  • Page 11: Audio I/o Settings

    Tx6n/5n/4n owner’s manual 11 audio i/o settings the txn can be operated in one of three audio input/output modes: stereo mode, parallel mode, or bridge mode. Make audio input/output connections and settings as follows. • with the factory settings, if both analog and digital (input from the slot) sig...

  • Page 12

    Audio i/o settings tx6n/5n/4n owner’s manual 12 the amplifier will operate as a monaural high-power amp, with the input signal of channel a (analog) or channel 1 (digital) as the source. 5-way binding post connectors speakon connectors • each of 5-way binding post connectors and speakon connectors a...

  • Page 13

    Tx6n/5n/4n owner’s manual 13 wiring of the [speakers] connectors turn off the power switch before connecting external devices to the txn. Remove about 13mm of insulation from the end of each speaker cable, and pass the bare wire through the holes in the appropriate speaker terminals. Tighten the ter...

  • Page 14: Network Connection Example

    Tx6n/5n/4n owner’s manual 14 network connection example if you connect the txn units’ [network] connector to a computer via an ethernet cable, you’ll be able to mon- itor/control the txn units from amp editor. Including computers and other equipment, a total of up to 253 units can be connected in a ...

  • Page 15: Troubleshooting

    Tx6n/5n/4n owner’s manual 15 troubleshooting initializing the internal memory you can initialize the amp’s internal memory. As desired, you can initialize the following two types of data. • user data: initialize all user data except for the event log and speaker processor library. • library: initial...

  • Page 16: Specifications

    Tx6n/5n/4n owner’s manual 16 specifications general specifications tx6n tx5n tx4n 120v 230v (*1) 120v 230v (*1) 120v 230v (*1) output power 1khz, thd + n = 1% 8 Ω per channel 1800w 1800w 1300w 1300w 1100w 1100w 4 Ω per channel 3000w 3000w 2200w 2300w 1900w 2000w 2 Ω per channel 2750w 2750w 2500w 250...

  • Page 17

    Specifications tx6n/5n/4n owner’s manual 17 (*1) output power depends on the power supply voltage. These figures are based on 230v. If the power supply voltage is 220v, output power will be about 8% less than the power shown in the table. Output power will be about 7% more in case of 240v. (*2) 1/8 ...

  • Page 18

    Specifications tx6n/5n/4n owner’s manual 18 block diagram 1+ 2+ 1– 2– 1+ 2+ 1– 2– current sensor po wer amplifier stage vol tage amplifier stage di fferenti al amplifier stage di fferenti al amplifier stage main transformer cha fg fan(l) powersw phase shift switching +b _ 2 –b _ 2 +e _ 2+15v –e _ 2 ...

  • Page 19

    Specifications tx6n/5n/4n owner’s manual 19 level diagram dsp block diagram attenuator (all models): 0.0 to -80.0, - ∞db (0.5db step) gain (all models): 19.8 to 43.8db (0.1db step) 32.0db (default) model tx6n tx5n tx4n model tx6n tx5n tx4n +22.6 to -1.4dbu (8 Ω) default: +10.4dbu +21.4 to -2.6dbu (8...

  • Page 20

    Specifications tx6n/5n/4n owner’s manual 20 dimensions 10 429 30 405 415 461 17 41 432 88 480 unit: mm.

  • Page 21

    Specifications tx6n/5n/4n owner’s manual 21 current draw 1/8 power is typical of program material with occasional clipping. Refer to these figures for most applications. 1/3 power represents program material with extremely heavy clipping. Test signal: pink noise, bandwidth limited from 22hz to 22khz...

  • Page 22

    Information for users on collection and disposal of old equipment this symbol on the products, packaging, and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling of old products, p...

  • Page 23

    Head office yamaha corporation, pro audio & digital musical instrument division nakazawa-cho 10-1, naka-ku, hamamatsu, japan 430-8650 tel: +81-53-460-2441 pa24 for details of products, please contact your nearest yamaha representative or the authorized distributor listed below. Pour plus de détails ...

  • Page 24

    Yamaha pro audio global web site: http://www.Yamahaproaudio.Com/ yamaha manual library http://www.Yamaha.Co.Jp/manual/ u.R.G., pro audio & digital musical instrument division, yamaha corporation © 2009 yamaha corporation wp58530 003pozcx.X-03c0 printed in indonesia.