Yamaha VL Owner's Manual - Edit/com/misc/part Setting
VL Version 2
28
EDIT/COM/MISC/CONTINUOUS SLIDER
● Slider Assign Parameters
A range of new parameters can be assigned to the continuous sliders.
Feature Reference pages: VL1 ➯ 43; VL1-m ➯ 43; VL7 ➯ 40
EDIT/COM/MISC/PART SETTING
The parameters in this page become active when the “
Key Mode
” parameter is set
to “
Part
”. “
Keymode is not Part
” appears in this page when the key mode is
not set to “
Part
”.
● Split
¯ off, Static, Dynamic
When “Split” is “off”, separate MIDI receive channels can be set for elements 1 and
2 allowing them to be controlled on different channels from an external MIDI controller.
In this case note data received on the receive channel set in the UTILITY/SYSTEM page
is ignored. Program change, continuous slider data (i.e. control change numbers 16 and
17; quick edit in the VL1-m), effect control data, polyphony control data, and main
volume data are received on the main receive channel set in the UTILITY/SYSTEM
page. When active, the element 1 and element 2 MIDI receive channels appear on line 5
of the PLAY mode display.