Yamaha VL Owner's Manual - ● Output Level

VL Version 2

41

4. New Features & Parameters

EDIT

● Output Level

¯ 0 … 100 %.

Sets the output level of the distortion sound. Higher values produce higher level.

● Mode

¯ LPF, BPF, HPF.

Determines the type of filter used by the wah effect: LPF = Low Pass Filter; BPF =

Band Pass Filter; HPF = High Pass Filter.

● Wah Pre/Post

¯ Pre, Post.

Determines whether the wah effect is placed before the distortion effect (“

Pre

”) or

after the distortion effect (“

Post

”).

● Cutoff Freq

¯ 26.9 Hz … 11.9 kHz.

Sets the central cutoff frequency for the wah effect.

● Resonance

¯ 1.0 … 15.6.

Sets the amount of emphasis at the wah effect cutoff frequency, and therefore the

depth of the wah effect. Higher values produce greater emphasis at the cutoff frequency.

● Sens

¯ 0 … 100 %.

Determines the amount of cutoff frequency variation or sweep. Higher values

produce a broader frequency variation. A setting of “0” results in no cutoff frequency

variation.