Yamaha VL Owner's Manual - Utility Mode
4. New Features & Parameters
EDIT
UTILITY Mode
Utility System
UTILITY MODE
DEMO
EDIT RECALL
MIDI BULK DUMP
SYSTEM
DISK
UTIL/SYSTEM/KBD SETTING
● Octave SW Hold
¯ off, on, Half PB, Full PB
New settings for the “
Octave SW Hold
” parameter allow the octave hold
switches to be used as trill switches to produce semitone and whole-tone trills. When
“
Half PB
” is selected pressing the UP or DOWN octave hold switch shifts the pitch up
or down by a semitone. With the “
Full PB
” setting the octave hold switches shift the
pitch a whole tone. In both cases pitch returns to normal when the switch is released.
NOTES■ Do not use the octave hold switches while operating the PITCH
wheel!
Feature Reference pages: VL1 ➯ 153; VL7 ➯ 151
UTIL/SYSTEM/TG SETTING
● WX Lip
¯ Normal, Expand
The keyboard-based VL models — the VL1 Ver.2 and VL7 Ver.2 — now include
the “
WX Lip
” parameter originally found only in the VL1-m.
This parameter can be set to “
Expand
” when using a WX11 or WX7 Wind Con-
troller in the tight-lip mode to expand the normally limited lip pitch bend range of these
controllers to the full range available on the VL instrument. Set to “
Normal
” when using
a WX11 or WX7 in the loose-lip mode, or when using an external keyboard or other non-
wind controller.
53
UTILITY