Z-Wave ZME WALLC-S Manual - page 6
11-11-2014
manuals.zwaveeurope.com/make.php?lang=en&type=&sku=ZME_WALLC-S
http://manuals.zwaveeurope.com/make.php?lang=en&type=&sku=ZME_WALLC-S
6/8
3
Switch All
4
Send Scenes
5
Send Preconfigured Scenes
7
Control Door Lock
8
Central Scene to Gateway (Default)
Command to Control Group B (Parameter Number 12, Parameter Size 1)
This parameter defines the command to be sent to devices of control group B when the related button is pressed
Value
Description
0
Disabled
1
Switch On/Off and Dim (send Basic Set and Switch Multilevel)
2
Switch On/Off only (send Basic Set)
3
Switch All
4
Send Scenes
5
Send Preconfigured Scenes
7
Control Door Lock
8
Central Scene to Gateway (Default)
Command to Control Group C (Parameter Number 13, Parameter Size 1)
This parameter defines the command to be sent to devices of control group C when the related button is pressed
Value
Description
0
Disabled
1
Switch On/Off and Dim (send Basic Set and Switch Multilevel)
2
Switch On/Off only (send Basic Set)
3
Switch All
4
Send Scenes
5
Send Preconfigured Scenes
7
Control Door Lock
8
Central Scene to Gateway (Default)
Command to Control Group D (Parameter Number 14, Parameter Size 1)
This parameter defines the command to be sent to devices of control group D when the related button is pressed
Value
Description
0
Disabled
1
Switch On/Off and Dim (send Basic Set and Switch Multilevel)
2
Switch On/Off only (send Basic Set)
3
Switch All
4
Send Scenes
5
Send Preconfigured Scenes
7
Control Door Lock
8
Central Scene to Gateway (Default)
Send the following Switch All commands (Parameter Number 21, Parameter Size 1)
Value
Description
1
Switch off only (Default)