Z-Wave ZME WALLC-S Manual - page 7
11-11-2014
manuals.zwaveeurope.com/make.php?lang=en&type=&sku=ZME_WALLC-S
http://manuals.zwaveeurope.com/make.php?lang=en&type=&sku=ZME_WALLC-S
7/8
2
Switch on only
255
Switch all on and off
Invert buttons (Parameter Number 22, Parameter Size 1)
Value
Description
0
No (Default)
1
Yes
Blocks wakeup even when wakeup interval is set (Parameter Number 25, Parameter Size 1)
If the device wakes up and there is no controller nearby, several unsuccessful communication attempts will drain battery.
Value
Description
0
Wakeup is blocked
1
Wakeup is possible if configured accordingly. (Default)
Send unsolicited Battery Report on Wake Up (Parameter Number 30, Parameter Size 1)
Value
Description
0
No
1
To same node as wake up notification (Default)
2
Broadcast to neighbors
Command Classes
Supported Command Classes
Battery (version 1)
Wake Up (version 2)
Association (version 2)
Version (version 2)
Scene Controller Configuration (version 1)
Multi Channel Association (version 2)
Multi Command Encapsulated (version 1)
Configuration (version 1)
Manufacturer Specific (version 1)
Central Scene (version 1)
Security (version 1)
Z-Wave Plus Information (version 1)
Device Reset Locally (version 1)
Association Group Information (version 1)
Basic (version 1)
Scene Activation (version 1)
Multilevel Switch (version 1)
Door Lock (version 1)
Multi Channel (version 1)
Powerlevel (version 1)
Controlled Command Classes
Central Scene (version 1)
Security (version 1)
Basic (version 1)
Scene Activation (version 1)