ZAAZ 20K User Manual - page 9
ZAAZMOVEMENT.COM
9
12.
Tighten all screws and bolts snugly.
10.
Attach the 3 cables from the
underside of the console to the 2
cables from the curved handles and
the cable from the center of the post.
14.
Connect the plug to the power outlet
and press the red switch on the power
button on the back of the base to turn on
the machine. Place the machine on a level
surface, and if necessary, level the machine
with the 2 adjustable feet at the base.
13.
To use the pulse monitor function,
ensure all protective plastic film is
removed from the sensors on the
machine handles.
NOTE:
Re-Tightening of screws and bolts may be required every 3-6 months, depending on use.
11.
Remove the screws from the underside
of the console and attach the console to
the top of the post by placing it where
the screw holes on the underside of the
console line up with the holes in the top
of the post. Reattach the screws back into
the underside of the console through the
underside of the top of the post.