Zadako Z1 User Manual - Diagnostics
Remarks to device installation
Before you insert SIM card into device, make sure that protection by PIN code
is deactivated and that data services are activated on your SIM card.
Device should not be installed in the area, where it would be exposed to high
temperatures (for example under the first level of cockpit, which can be heated by
sun).
To ensure an unauthorized manipulation with Car alarm it is useful to
connect external alarm input nr.1 (24-hours input) as protection of cockpit cover or
other area, in which alarm is installed.
Diagnostics
Diagnostics mode is activated by ignition box (through input marked as „KEY“or
input „15“). It is allowed to get into diagnostics mode after two minutes from
connection of device to power supply
.
•
Starting position for test mode is key in ignition box in position 0 (input KEY
is without supply) and together with that arming must be activated
•
Test mode starts by following method , while it is important to keep time
intervals :
1. Turn the key in ignition box to position 1 and wait 1 second
2. Turn the key back to position 0 and wait 1 second
3. Repeat points 1. and 2.
4. At last turn the key to position 1 and leave it in that position
Graphic presentation of sequence:
Position 1
Position 0
arming switched on 1s 1s 1s 1s diagnostics switched on
15