ZALMAN CNPS11X Performa+ User Manual - page 9
Other manuals for CNPS11X Performa+:
User Manual
of
12
9
.COM
M/B
Please make sure that PWM Control Mode is activated in the motherboard’s
BIOS settings.
Caution
Connect the cooler’s 4-pin connector
to the motherboard’s CPU Fan header.
AMD Clip
Partially unscrew the four bolts located on the base of the CPU cooler. Then,
insert the AMD Clips between the base and the heatpipe cover, with the clips
bent away from the heatsink.
The holes in the Clip (as shown below)
are matched to the “keys” on the heatpipe
cover for secure Clip installation.
AMD Socket Installation
Caution
Insert
Key
Install Bolts to the Backplate according to the Socket Type and secure with Side Caps.
1
2