Zanussi FI 4590 T Instruction Booklet - Installation

4

INSTALLATION

If this model, equipped with a magnetic door lock, 

replaces an old appliance with a catch, ensure that 

the latter cannot be used before discarding it to 

prevent children being trapped inside.

Positioning

The appliance should be installed well away from 

sources of heat such as radiators, boilers, direct 

sunlight etc.; best performance is obtained with 

ambient temperature between +18

°

C and +38

°

C.

Electrical connection

Before plugging in, ensure that the voltage and 

frequency shown on the serial number plate 

correspond to your domestic power supply. Voltage 

can vary by 

±

6% of the rated voltage. For operation 

with different voltages, a suitably sized auto-

transformer must be used.

The appliance must be earthed.

The power supply cable plug is provided with a 

contact for this purpose. If the domestic power 

supply socket is not earthed, connect the appliance 

to a separate earth in compliance with current 

regulations, consulting a specialist technician.

The Manufacturer declines all responsibility if  the 

above safety precautions are not observed.

This appliance complies with EEC directive 

number 87/308 of 2/6/87 relative to radio 

interference suppression.

This appliance complies with the following 

E.E.C. Directives:

-

73/23 EEC

 of 19.2.73 (Low Voltage Directive) and 

subsequent modifications;

-

89/336 EEC

 of 3.5.89 (Electromagnetic 

Compatibility Directive) and subsequent 

modifications.

Cleaning the inside

Before using, clean all inside parts with warm water 

and neutral soap to remove the typical new smell. 

Dry thoroughly. Do not use abrasive detergent or 

powders as these can damage the finish.