Zanussi FI 4590 T Instruction Booklet - page 5

5

Instructions for totally built-in appliances

Dimensions of  the recess

Height of housing

mm 1225

Depth of housing

mm  550

Width of housing

mm  560

The appliance’s door has been locked in position for 

transport by means of  pins on both sides. According to 

the door opening direction, remove relevant pins at the 

top and at the bottom.

For appropriate venting, follow indications in 

Fig. 1.

Fig. 1

Push appliance into the housing until stop strip (A) 

touches the kitchen unit.

Fig. 2

D028

min.

cm

2

200

50-min. cm

2

 200

A

D022

Open the door and push the appliance against the 

side of kitchen furniture opposite to that of 

appliance hinges.

Fasten the appliance with 4 screws provided in the 

kit included with the appliance. Snap vent grill (C) 

and hinge cover (D) into position.

Fig. 3

Press in the joint covers between the appliance and 

the kitchen furniture.

Fig. 4

Apply covers (B) on joint cover lugs and into hinge 

holes.

Fig. 5

C

D

D455

D456

D110

B