Zanussi FI 4590 T Instruction Booklet - page 6

6

Position the two runners (H) at the top and bottom 

of the inside of the kitchen unit as shown in Fig. 6 

and mark the position of the external holes.

After preparing the holes, screw the runners to the 

kitchen unit door using 3.5x16 mm screws.

Fig. 6

Open both the appliance door and that of the 

kitchen unit to approx. 90

°

.

Place the little plates over the runners. Hold the 

doors of the appliance and the unit together and 

mark the holes.

Fig. 7

D094

20mm

H

8mm

PR34

Remove the little plates and make the holes with a 

diam. of 2 mm. Replace the little plates over the 

runners and screw in the screws provided (3.5x16 

mm).

For the alignment of the kitchen unit door, if 

necessary, use the clearance size of the slotted 

holes.

At the end of the procedure, check that the doors of 

the appliance and the kitchen unit open properly.

Fig. 8

PR35