Zanussi ZDM17301SA User Manual - Care and Cleaning
CAUTION!
Make sure that the spray arm can
turn freely before you start a
programme.
Hints and tips
• Do not put in the appliance items that can
absorb water (sponges, household cloths).
• Remove the remaining food from the items.
• Make soft the remaining burned food on the
items.
• Put hollow items (cups, glasses and pans)
with the opening down.
• Make sure that water does not collect in
containers or in bowls.
• Make sure that cutlery and dishes do not
bond together.
• Make sure that the glasses do not touch with
each other.
• Put small items in the cutlery basket.
• Mix the spoons with other cutlery to prevent
them to bond together.
• When you put items in the basket make sure
that water can reach all surfaces.
• Make sure that light items cannot move.
• Water droplets can collect on plastic items
and non-stick pans.
• Long bladed knives are potential hazard
when positioned vertically.
Care and cleaning
Maintenance
WARNING!
Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
CAUTION!
Do not use the appliance without
filters.
Make sure that the filters are
correctly positioned. An incorrect
positioning of the filters will cause
bad washing results and damage to
the appliance.
Dirty filters and a clogged spray arm
decrease the washing results.
Regularly check and if necessary,
clean the filters.
Removing and cleaning the filters
The filter consists of three parts.
A) Coarse filter
B) Fine filter
C) Main filter
A
B
C
1. Turn the fine filter (B) counterclockwise and
remove the filter assembly.
2. Remove the coarse filter (A) by pulling it out
from the fine filter (B).
3. Fully wash the filters with water and a
brush.
4. Put the coarse filter (A) into the fine filter
(B).
5. Put the filter assembly into the tub and turn
the fine filter (B) clockwise until it locks.
To clean the spray arm
Do not remove the spray arm. If the holes in the
spray arm are clogged, remove remaining parts
of soil with a thin pointed object.
To clean the external surfaces
Clean the external surfaces of the appliance
and the control panel with a moist soft cloth.
Only use neutral detergents.
Do not use abrasive products, abrasive cleaning
pads or solvents (e.g. acetone).
www.zanussi.com
11