Zavio V1100 User Manual - Schedule Recording
V1100 User Manual
20
Action
There are multiple choices for action taking which is optional for user to select all of them or part of
them: Send Image、Send Notification、Activate Digital Output、PTZ Action.
Send Image: You may set up where the image sent to, options like event server and SD card.
You must configure it first, please refer to Event Server.
Send Notification: Firstly got to HTTP server configure the HTTP server URL, port, User ID,
Password, and Proxy server settings.
Note:
The setting of URL should be the same as CGI.
Activate Digital Output: Start the external digital output device when the trigger is activated.
You may set the time for continually action.
PTZ Action: Firstly configure the PTZ to set up the preset positions and tour you desired. You
may select to return to the last position after the event being triggered.
Schedule
You may set up the event schedule as “always” or scheduled by working day, weekend or night mode. You
must configure schedule before using it.
Schedule Recording
General
Name the recording file and make it on or off.
Action
File Size: You can manually write in the file size as the suggested range.
Cyclic Size: You can manually write in the cyclic size as the suggested range.
Schedule
You may set up the event schedule as “always” or scheduled by working day, weekend or night mode. You
must configure schedule before using it.
Audio Detection
Audio Detection
Select “on” if you want to activate the audio detection. The bar on the top of motion detection area is
red when alarm is triggered.
Threshold: Set alarm threshold for audio detection. The higher threshold is, the lesser
detections can be triggered.
Sensitivity: Set alarm sensitivity for audio detection. The higher sensitivity is, the more
sensitive it gets.